pic-2011atmb-tha waitrony, pic-2011atmb-tha Datasheet - Page 3

• Manufacturer Part Number: pic-2011atmb-tha
• Description: Infrared Receiver Module
• Manufacturer: waitrony

Module No.: PIC-2011ATMB-THA
Testing Method
Distance between emitter and detector
specifies
output waveform satisfies the standard
(FIG-3) under the conditions below
against the standard transmitter.
a. Measuring place
b. Ambient light source
c. Standard transmitter
Precautions for Use
a. Store and use where there is no force causing transformation or change in quality.
b. Store and use where there is no corrosive gas or sea (salt) breeze.
c. Store and use where there is no extreme humidity.
d. Solder the lead pin within the condition of ratings. After soldering, do not add exterior
e. Do not wash this device. Wipe the stains of diode side with a soft cloth. You can use the
f. To prevent static electricity damage to the pre-amp, make sure that the human body,
Infrared Receiver Module
force.
solvent, ethyl alcohol, or methyl alcohol only.
the soldering iron are connected to ground before using.
Indoor without extreme reflection
of light.
Detecting surface illumination is
200±5Lux under ordinary white
fluorescence lamp of no high
frequency lightning.
Transmitter wave indicated in
FIG-2 of standard transmitter is
arranged to satisfy Vo≥50mVp-p
under
specified in FIG-3
the
maximum
measuring
distance
circuit
that
µ
µ