g3ne-220tl-us Omron Corporation, g3ne-220tl-us Datasheet - Page 5

• Manufacturer Part Number: g3ne-220tl-us
• Description: Compact, Low-cost, Ssr Switching 5 To 20 A
• Manufacturer: Omron Corporation

J APPROVALS
UL (File No. E64562)/CSA File No. LR35535
Precautions
Refer to the pages at the back of the catalog for general precautions.
Although the LOAD terminal are internally connected to a snubber
circuit that absorbs noises, do not wire power lines or high-tension
lines with the load connecting lines of the G3NE in the same conduit
or the G3NE may be damaged or malfunction.
Because the operation time of the G3NE is extremely short, take
measures to suppress noise induced between the INPUT terminals.
If generation of strong noise is expected, connect an external noise
absorber such as an RC circuit.
Input voltage
5, 12, 24 VDC
SSR type
G3NE- -205
G3NE- -210
G3NE- -210
G3NE- -220
G3NE- -220
Output ratings
5 A resistive 240 VAC, 3 A Tungsten 240 VAC, 3.2 A FLA 19.2 A LRA 240 VAC, 50/60 Hz
10 A resistive 240 VAC, 7.5 A Tungsten 240 VAC, 4.8 A FLA 28.8 A LRA 240 VAC, 50/60 Hz
5 A resistive 240 VAC, 5 A Tungsten 240 VAC, 3 A FLA, 18 A LRA, 240 VAC, 50/60 Hz
20 A resistive 240 VAC, 11 A Tungsten 240 VAC, 11.1 FLA, 66.6 LRA, 240 VAC, 50/60 Hz
6 A resistive 240 VAC, 6 A Tungsten 240 VAC, 3.3 FLA, 19.8 LRA, 240 VAC, 50/60 Hz
Do not apply excessive force to the terminals. Exercise care when
pulling or inserting the terminal clips.
When attaching a heat sink to the G3NE, apply heat conductive
grease on the heat sink. Tighten the mounting screws of the heat
sink with a torque of 0.59 to 0.98 N-m.
Solid State Relay
G3NE
5