rfm12 Rhopoint Components, rfm12 Datasheet

no-image

rfm12

Manufacturer Part Number
rfm12
Description
Universal Ism Band Fsk Transceiver Module
Manufacturer
Rhopoint Components
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
rfm12B-433-S1
Manufacturer:
NIPPON
Quantity:
30 000
RFM12
UNIVERSAL ISM BAND FSK TRANSCEIVER MODULE
RFM12
(the purpose of this spec covers mainly for the
RFM12
physical characteristic of the module, for register
configure and its related command info please refer
to
RF12 data
sheets)
General Introduction
RFM12 is a low costing ISM band transceiver
module implemented with unique PLL. It works
signal ranges from 315/433/868/915MHZ bands,
comply with FCC, ETSI regulation. The SPI
interface is used to communicate with
microcontroller for parameter setting.
Features:
• Low costing, high performance and price ratio
• Tuning free during production
• PLL and zero IF technology
• Fast PLL lock time
• High resolution PLL with 2.5 KHz step
• High data rate (up to 115.2 kbps with internal demodulator,with external RC filter highest data rate is
256 kbps)
• Differential antenna input
• Automatic antenna tuning
• Programmable TX frequency deviation (from 15 to 240 KHz)
• Programmable receiver bandwidth (from 67 to 400 kHz)
• Analog and digital signal strength indicator (ARSSI/DRSSI)
• AFC
• DQD
• Internal data filtering and clock recovery
• RX synchron pattern recognition
• SPI interface
• Clock and reset signal output for external MCU use
• 16 bit RX Data FIFO
• Two 8 bit TX data registers
• 10MHz crystal for PLL timing
• Wakeup timer
• 2.2V - 5.4V power supply
• Low power consumption
• Standby current less than 0.3uA
Tel: +86-755-82973806 Fax: +86-755-82973550 E-mail: sales@hoperf.com
http://www.hoperf.com

Related parts for rfm12

rfm12 Summary of contents

Page 1

... RF12 data sheets) General Introduction RFM12 is a low costing ISM band transceiver module implemented with unique PLL. It works signal ranges from 315/433/868/915MHZ bands, comply with FCC, ETSI regulation. The SPI interface is used to communicate with microcontroller for parameter setting ...

Page 2

... Transmit FSK data input/ Received data output (FIFO not used)/ FIFO select Clock output (no FIFO )/ external filter capacitor(analog mode)/ FIFO interrupts(active high)when FIFO level set to 1, FIFO empty interruption can be achieved Clock output for external microcontroller Reset output(active low) Power ground http://www.hoperf.com RFM12 DIP ...

Page 3

... Crystal and base band on All blocks off 0.1V per step 2.2 0.7 =5. =2mA ol I =-2mA http://www.hoperf.com RFM12 maximum Unit 6.0 V Vdd+0 1000 V ℃ 125 ℃ 260 maximum Unit 5.4 V ℃ 85 typical maximum Unit ...

Page 4

... FSK deviation in the FSK remark 315/433MHZ band 868/915MHZ band Selectable steps http://www.hoperf.com RFM12 typical max Unit 10 12 MHz 319.75 439.75 MHz 879.51 929.27 255.80 351.80 MHz 703.61 743.41 383.71 527.71 MHz 1055 ...

Page 5

... Receiver bandwidth=67KHz,data rate =1.2kbps,Transmitter frequency deviation =45KHZ(matches with RFM12)in free open area 915MHz band Receiver bandwidth=67KHz,data rate =1.2kbps,Transmitter frequency deviation =45KHZ(matches with RFM12)in free open area Tel: +86-755-82973806 Fax: +86-755-82973550 E-mail: sales@hoperf.com In low bands 2 In high bands 2 ...

Page 6

... SGS Reports Tel: +86-755-82973806 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com RFM12 ...

Page 7

... Tel: +86-755-82973806 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com RFM12 ...

Page 8

... Mechanical Dimension (units in mm) Tel: +86-755-82973806 Fax: +86-755-82973550 E-mail: sales@hoperf.com SMD PACKAGE(S1) SMD PACKAGE(S2) http://www.hoperf.com RFM12 ...

Page 9

... Module Model Definition model=module-operation band RFM12 – 433-D/S module type example:1,RFM12 module at 433MHz band, DIP : RFM12-433-D。 2,RFM12 module at 868MHZ band, SMD, thickness at 4.2mm: RFM12-868-S1。 Tel: +86-755-82973806 Fax: +86-755-82973550 E-mail: sales@hoperf.com DIP PACKAGE(D) operation band Package http://www ...

Page 10

... NO WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MECHANTABILITY OR FITNESS FOR A ARTICULAR PURPOSE, ARE OFFERED IN THIS DOCUMENT. ©2006, HOPE MICROELECTRONICS CO.,LTD. All rights reserved. http://www.hoperf.com RFM12 ...

Related keywords