SFP-SATA-SAS-DR MRV [MRV Communications, Inc.], SFP-SATA-SAS-DR Datasheet

SFP-SATA-SAS-DR

Manufacturer Part Number

SFP-SATA-SAS-DR

Description

SAS/SATA SFP Transceivers

Manufacturer

MRV [MRV Communications, Inc.]

Datasheet

1.SFP-SATA-SAS-DR.pdf (2 pages)

Current page: 1 of 2
Download datasheet (357Kb)

Datasheet

SAS/SATA SFP Transceivers

Overview

There are a number of diff erent protocols used in the storage industry. In a storage test lab environment, fl exibility and

multi-protocol support is paramount to effi cient operation. When dealing with the SAS/SATA protocol, cable length

restraints and connector reliability compromise effi ciency even further.

MRV’s physical layer switch, the Media Cross Connect (MCC), addresses storage lab effi ciency by providing a wire-once

solution with support for Fibre Channel, iSCSI, FCoE, and now SAS/SATA in one system.

SAS/SATA Modules Provide a Complete Wire-Once Solution

Using the MCC in a storage test lab enables lab administrators to physically connect storage equipment of various types

and protocols providing greater fl exibility and improved effi ciency.

The MCC is initially cabled to all lab devices then software commands are used to confi gure and store test topologies

to be recalled as needed. Test time and confi guration errors are reduced, repeatability of tests like disaster or failover

simulation is simplifi ed, and expensive test equipment can be shared.

MRV developed a small form-factor pluggable (SFP) device specifi cally to support Serial Attached SCSI (SAS)/Serial ATA

(SATA) to be used with the MCC interface blade. The SAS/SATA SFP is available in two models: the Host SFP connects to

the initiator and the Drive SFP connects to the target.

The blade architecture of the MCC allows mixing diff erent types of blades in a single system. MRV’s SAS/SATA SFP

provides the fl exibility to support diff erent protocols within the same blade and allows the MCC to be tailored to meet

the specifi c needs of the testing environment.

COMPLEX MADE SIMPLE:

WIRE-ONCE AND RECONFIGURE REMOTELY

Fan

Out

sales@mrv.com

MCC-144

Features

Dual rate 1.5/3.0 Gbps

Full transparency to end devices

Input signal detection

TX disable

Standard SAS/SATA connector

Initiators

DR 1

HD 1

HD 2

DR 2

HD 3

DR 3

HD 4

DR 4

HD 5

DR 5

SATA

SAS

Related parts for SFP-SATA-SAS-DR

SFP-SATA-SAS-DR Summary of contents

Page 1

... MRV developed a small form-factor pluggable (SFP) device specifi cally to support Serial Attached SCSI (SAS)/Serial ATA (SATA used with the MCC interface blade. The SAS/SATA SFP is available in two models: the Host SFP connects to the initiator and the Drive SFP connects to the target. ...

Page 2

... SFP-SATA-SAS-HT SATA applications, using the MCC 2/4 slot chassis, Host side This SFP plugs into the EMPMC-36SFP for 1.5G and 3G SAS/ SFP-SATA-SAS-DR SATA applications, using the MCC 2/4 slot chassis, Drive side For detailed information about MRV’s Media Cross Connect system, visit MRV has more than 50 offi ces throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. ...

Related keywords

SFP-SATA-SAS-DR datasheet
SFP-SATA-SAS-DR data sheet
SFP-SATA-SAS-DR pdf datasheet
SFP-SATA-SAS-DR component
SFP-SATA-SAS-DR part
SFP-SATA-SAS-DR distributor
SFP-SATA-SAS-DR RoHS
SFP-SATA-SAS-DR datasheet download