ten6-4810 Traco Power, ten6-4810 Datasheet - Page 2

• Manufacturer Part Number: ten6-4810
• Description: Dc/dc Converters
• Manufacturer: Traco Power

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Input Specifications
Input current no load /full load
Start-up voltage /
under voltage shut down
Surge voltage (1 sec. max.)
Reverse voltage protection
Conducted noise (input)
Output Specifications
Voltage set accuracy
Regulation
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Current limitation
Short circuit protection
Capacitive load
General Specifications
Temperature ranges
Derating
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217E ground benign)
Isolation voltage (60 sec)
Isolation capacity
Isolation resistance
Switching frequency
Safety standards
Safety approval
– Input variation Vin min. to Vin max.
– Load variation 10 – 100 %
– Operating
– Case temperature
– Storage
– Input/Output
– Input/Output
– Input/Output (500 VDC)
dual output models unbalanced load 3.0 % max.
dual output models balanced load 1.0 % max.
single output models 1.0 % max.
single output models 3’000 µF max.
dual output models 680 µF max.
48 Vin models 11 mA / 300 mA typ. (at 24 VDC Vin)
48 Vin models 17 VDC / 16 VDC typ.
48 Vin models 100 V max.
24 Vin models 22 mA / 600 mA typ. (at 12 VDC Vin)
24 Vin models 8.5 VDC / 8.0 VDC typ.
24 Vin models 50 V max.
20 mA / 300 mA typ. (at 24 VDC Vin)
10 mA / 150 mA typ. (at 48 VDC Vin)
1.0 A max.
EN 55022 level A, FCC part 15, level A
± 1 %
0.3 % max.
75 mVpk-pk max
± 0.02 % / K
> 110% of Iout max., constant current
indefinite (automatic recovery)
– 40 °C ... + 85 °C
+ 100 °C max.
– 55 °C ... + 125 °C
3.5% /K above 70°C
95 % rel H max.
>1 Mio. h @ + 25 °C
1’500 VDC
380 pF typ
> 1‘000 M Ohm
300 kHz typ. (Pulse frequency modulation PFM)
UL 60950-1, IEC 60950-1, EN 60950-1
CSA File No. 226037
http://directories.csa-international.org
DC/DC Converters
TEN 6 Series
Page 2 of 3
6 Watt