LTL2H3VFTS LITEON [Lite-On Technology Corporation], LTL2H3VFTS Datasheet - Page 8

• Manufacturer Part Number: LTL2H3VFTS
• Description: Property of Lite-On Only
• Manufacturer: LITEON [Lite-On Technology Corporation]

6. Drive Method
7. ESD (Electrostatic Discharge)
BNS-OD-C131/A4
Part No. : LTL2H3VFTS
Suggestions to prevent ESD damage:
Static Electricity or power surge will damage the LED.
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
! Use a conductive wrist band or anti- electrostatic glove when handling these LEDs
! All devices, equipment, and machinery must be properly grounded
! Work tables, storage racks, etc. should be properly grounded
! Use ion blower to neutralize the static charge which might have built up on surface of the LEDs
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
(A) Recommended circuit
plastic lens as a result of friction between LEDs during storage and handing
of those LEDs
Circuit model A
LED
LITE-ON TECHNOLOGY CORPORATION
P r o p e r t y o f L i t e - O n O n l y
Circuit model B
LED
Page :
8
of
10