IR3088AM IRF [International Rectifier], IR3088AM Datasheet - Page 31

• Manufacturer Part Number: IR3088AM
• Description: XPHASETM PHASE IC WITH FAULT AND OVERTEMP DETECT
• Manufacturer: IRF [International Rectifier]

PCB Metal and Component Placement
• Lead land width should be equal to nominal part lead width. The minimum lead to lead spacing should be ≥
• Lead land length should be equal to maximum part lead length + 0.2 mm outboard extension + 0.05mm
• Center pad land length and width should be equal to maximum part pad length and width. However, the
• Four 0.3mm diameter vias shall be placed in the pad land spaced at 1.2mm, and connected to ground to
Page 31 of 34
0.2mm to minimize shorting.
inboard extension. The outboard extension ensures a large and inspectable toe fillet, and the inboard
extension will accommodate any part misalignment and ensure a fillet.
minimum metal to metal spacing should be ≥ 0.17mm for 2 oz. Copper (≥ 0.1mm for 1 oz. Copper and ≥
0.23mm for 3 oz. Copper)
minimize the noise effect on the IC, and to transfer heat to the PCB.
IR3088A
9/30
/04