TEP75-2412WI TRACOPOWER [TRACO Electronic AG], TEP75-2412WI Datasheet - Page 3

• Manufacturer Part Number: TEP75-2412WI
• Description: DC/DC Converters
• Manufacturer: TRACOPOWER [TRACO Electronic AG]

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
General Specifications
Temperature ranges
Thermal impedance
Derating
Over temperature protection
Thermal shock
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217F, @ 25°C, ground benign)
Isolation voltage (60sec.)
Isolation capacity
Isolation resistance
Switching frequency
Safety standards
Safety approvals (pending)
Remote On/Off
External output trimming:
7
8
Trim up
Ru
Trim down
6
7
– Operating
– Casing temperature
– Storage
– without Heatsink
– with Heatsink
– Input/Output
– Input/Case
– Input/Output
– Input/Output (500 VDC)
– positive logic (standard)
– negative logic (option -N)
– Off idle current:
Rd
+ 10 %
+ 5 %
- 20 %
- 10 %
Ru
Rd
5 VDC
any output
62
33
8.2
3.0
12 VDC
– Off: 0 to 1.2 VDC or short circuit pin 1 and 3
– On: 3 to 12 VDC or open circuit
– On: 0 to 1.2 VDC or short circuit pin 1 and 3
– Off: 3 to 12 VDC or open circuit
180
91
closest resistor out of the E24 array [kOhm]
–40°C to +75°C
+105°C max.
–55°C to +125°C
6.7 °C/W
4.7 °C/W
See derating graphs page 4
at 115°C
acc. MIL-STD-810F
95 % rel H max.
75‘000 h
2’250 VDC (basic insulation)
1’500 VDC
2500 pF max.
>1 GOhm min.
300 kHz typ. (puls width modulation)
UL 60950-1 , IEC 60950-1, EN 60950-1
UL 60950-1, CB- test report
3 mA
15 VDC
240
120
DC/DC Converters
TEP 75WI Series
24 VDC
200
390
28 VDC
240
470
48 VDC
Page 3 of 6
75 Watt
820
430