SLE ITT [ITT Industries], SLE Datasheet - Page 10

• Manufacturer Part Number: SLE
• Description: Snap-Lock Environmentally Sealed - Rectangular
• Manufacturer: ITT [ITT Industries]

Contact Extraction Tool
Part Number: 274-7068-001
Tip Part Number: 323-9519-000
· A Standard CET - SLE/SLC is available for
Insertion Tool
No insertion tool is required. The
contact is easily snapped in
from the rear of the connector
manually.
Extraction
Snap-Lock Environmentally Sealed - Rectangular
Extraction Tool
Insertion/Extraction Instructions for Crimp Contacts
1. Open the CET - SLE Extraction
tool and place it over the insulation
of the wire.
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
extraction of the individual crimp contacts. Insertion
tool is not required.
1. Move to the rear of the
connector so that the contact
cavities can be identified.
2. Using a straight motion forward,
insert the tool along the wire until it
bottoms against the connector. (Do
not use a screwing motion -
damage will result.)
29
2. Insert a crimp terminated
assembly into a selected cavity.
3. While the extraction tool is in
place, simply pull the wire/contact
assembly out.
3. Continue the forward movement
until and audible snap can be felt
and heard. Slight pull in the
opposite direction will confirm
complete insertion.
4. Remove the extraction tool.
Extraction is complete.
Cannon SLE