WTS701EF WINBOND [Winbond], WTS701EF Datasheet - Page 37

• Manufacturer Part Number: WTS701EF
• Description: WINBOND SINGLE-CHIP TEXT-TO-SPEECH PROCESSOR
• Manufacturer: WINBOND [Winbond]

ABBR_DEL
Byte
Sequence:
Description:
ENTER_RRSM
Byte Sequence:
Description:
ABBR_DEL
This command deletes abbreviation entry from abbreviation table.
ENTER_RRSM S
This command is used in programming mode, and causes the xdata and code store memory to swap
spaces. Please refer to subsection
All commands described in section 7.4.1 are the only legal commands that should be sent to the
WTS701 device, unless stated otherwise. Other commands should not be sent to the device, as the
device behavior cannot be predicted. Specific illegal commands are those in which the 2 Most
Significant Bits of the Command Byte are zeros and are not defined in this document as commands
allowed to be sent to the WTS701.
The configuration registers are accessed by sending the appropriate configuration command followed
by a single byte of data to load the register. The definition of the contents of the various registers is
given below. The default value for each of these registers after Power Up or Reset is also described in
Table
10.
7.4.2 Illegal Commands
7.4.3 Configuration Registers
D
Class
Host controller
WTS701
Delete an entry from the abbreviation table.
WAP
ELETE
Class
Host controller
WTS701
Swap memory between xdata and code store.
M
A
EMORY
BBREVIATION
2
0
Type
Status Byte 0
7.8
E
for more information about customizing abbreviations.
0x83
NTRY
Type
Status Byte 0
I
- 37 -
0x0C
0x00
Status Byte 1
I
Status Byte 1
DATA0
Status Byte 0
Publication Release Date: May 2003
0x00
…
…
WTS701
Status Byte n%2
Revision 3.09
DATAn