TSI-1 AGERE [Agere Systems], TSI-1 Datasheet - Page 45

• Manufacturer Part Number: TSI-1
• Description: 1k x 1k Time-Slot Interchanger
• Manufacturer: AGERE [Agere Systems]

Data Sheet, Revision 3
September 21, 2005
Table 6-37. TPM_Configuration (Read/Write)
The TPG can be configured to monitor any one of the ITU-T test patterns specified in O.150, O.151, or O.152, as well as
idle code or user-specified data.
Table 6-38. TPM_User_Pattern (Read/Write)
Agere Systems Inc.
Address
Address
0x00604
0x00606
15:7 Unused.
15:0 TPM_User_Pattern. User-definable data for pattern monitoring. If pattern 0xF is specified
3:0
Bit
Bit
6
5
4
TPM_Pattern_Invert. Incoming data patterns are inverted prior to checking when this bit is
selected.
0 = Do not invert TPM data.
1 = Invert TPM data.
Reset_TPM_Error_Counter. Resets the error counter (TPM_Error_Count see
on page
0 = Allow TPM_Error_Count to advance.
1 = Reset TPM_Error_Count (to zero).
Pattern_Monitor_Enable. Enable the pattern monitor:
0 = Pattern monitor off.
1 = Pattern monitor on.
TPM_Pattern_Select. These bits select the test pattern to be monitored from the selected
time slots.
0000 = Idle pattern (0011).
0001 = Mark (all ones AIS).
0010 = Alternating 0s and 1s—0x55.
0011 = 2
0100 = 2
0101 = 2
0110 = 2
0111 = 2
1000 = 2
1001 = QRSS (2
1010 = QRSS (2
1011 = 2
1100 = 2
1101 = 2
1110 = Indexed (data increments each time slot).
1111 = User pattern (repeating 2 bytes of data as specified in TPG_User_Pattern).
by the TPM_Pattern_Select field, this data will be used to check against incoming data. Bit
[15] gets checked first in time.
15
46).
9
11
23
29
31
11
11
20
– 1.
– 1 with zero suppression when next 7 bits are zero.
– 1.
– 1.
– 1.
– 1.
– 1.
– 1 with zero suppression when previous 7 bits are zero.
– 1.
20
20
– 1 with zero suppression when the next 14 bits are zero).
– 1 with zero suppression when the next 14 bits are zero).
Name/Description
Name/Description
1k x 1k Time-Slot Interchanger
Table 6-39
Default
Default
0x0000
0x0
TSI-1
—
0
0
0
45