DRM4000L-N00-232 HONEYWELL [Honeywell Solid State Electronics Center], DRM4000L-N00-232 Datasheet - Page 4

• Manufacturer Part Number: DRM4000L-N00-232
• Manufacturer: HONEYWELL [Honeywell Solid State Electronics Center]

Honeywell
12001 Highway 55
Plymouth, MN 55441
Tel: [phone]
www.magneticsensors.com
DRM4000L
CONNECTIONS
The DRM4000L has a Samtec TFM-105-02-S-D-LC connector on the circuit board for the J1 electrical interface. Possible
mating connectors would be the Samtec SFSD-05- for wired assemblies and the SFM-105- for mating circuit boards. The
table below shows the interface pin-out definition for J1.
.
DEVELOPMENT KIT
The DRM4000L Development Kit includes a plastic enclosure with an internal I/O adapter board with a USB interface,
GPS receiver, and a rechargeable lithium battery, Also included are the Windows™ DRM4000L Host Software,
DRM4000L User’s Guide, carrying case, GPS antenna, baseball cap with Velcro antenna mount and a USB patch cable.
It is highly recommended that first time users procure the development kit first, before ordering additional DRM4000L
OEM modules.
The mini-B USB jack on the DRM4000L kit enclosure accommodates data transfer upto 38.4kbps as well as trickle
charging the battery when required. The pushbutton power on/off switch doubles as a momentary "event" marker button
to help in data collection processing.
ORDERING INFORMATION
FIND OUT MORE
For more information on Honeywell’s Magnetic Sensors, Compassing, Magnetometry and Dead Reckoning visit us online
at www.honeywell.com/magneticsensors or contact us at 800-323-8295 (763-954-2474 internationally).
U.S. Patents 5,583,776 5.952,825 6, 522,266 6,539,639 6,543,146 6,667,682 6,813,582 6,842,991 6,877,237 and 7,095,226 apply to the
technology described. DRM and SmartPedometry are trademarks of Honeywell. Honeywell reserves the right to make changes to any products or
technology herein to improve reliability, function or design. Honeywell does not assume any liability arising out of the application or use of any product;
neither does it convey any license under its patent rights nor the rights of others.
4
Ordering Number
DRM4000L-N00-232
DRM4000L-N00-USB-DEMO
J1 Pin
10
1
2
3
4
5
6
7
8
9
1PULSEPERSEC
+3.3V, 50mA max
Signal Definition
ODOMETER
HOST_RXD
HOST_TXD
EGPS RXD
EGPS TXD
EVENT
J1 Interface Pin-Out Definition
BAT+
GND
Data Interface
RS-232
USB
Form #900426
September 2011
©2011 Honeywell International Inc.
To external GPS receiver power input
Data from Host Computer to DRM
Data to Host Computer from DRM
Data from GPS receiver to DRM
Data to GPS receiver from DRM
+2.8 to +5.5 Volts from Battery
Product
Dead Reckoning Module
Dead Reckoning Module Development Kit
Optional Event Marker Input
Power and Data Return
Comment
not used
not used
www.honeywell.com