CXA2061 Sony Corporation, CXA2061 Datasheet - Page 24

• Manufacturer Part Number: CXA2061
• Description: Y/C/RGB/D for NTSC Color TVs
• Manufacturer: Sony Corporation

H POSITION (6): Horizontal picture position adjustment (HAFC phase control)
AFC BOW (4): Vertical line bow compensation amount adjustment
AFC ANGLE (4): Vertical line slope compensation amount adjustment (Phase control according to HAFC VSAW)
LEFT HBLK (4): HBLK width control for left side of picture when H BLK = 1
RIGHT HBLK (4): HBLK width control for right side of picture when H BLK = 1
H BLK (1): HBLK width control switch during 4:3 software normal mode on a 16:9 CRT
FH HI (1): Increases the H oscillator frequency free-running frequency by 1kHz.
HD W (1): HD pulse width varying switch (Set to 0 at power-on.)
V SIZE (6): Vertical picture size adjustment (VD output gain control)
0h = 2µs delay (Picture position shifts to right: image delayed with respect to HD.)
3Fh = 2µs advance (Picture position shifts to left: image advanced with respect to HD.)
0h = Top and bottom of picture delayed 500ns with respect to picture center.
7h = No compensation
Fh = Top and boottom of picture advanced 500ns with respect to picture center.
0h = Top of picture delayed 500ns, bottom of picture advanced 500ns with respect to picture center.
7h = No compensation
Fh = Top of picture advanced 500ns, bottom of picture delayed 500ns with respect to picture center.
0h = +1.2µs HBLK width maximum
7h = Center
Fh = –1.2µs HBLK width minimum
0h = +1.2µs HBLK width maximum
7h = Center
Fh = –1.2µs HBLK width minimum
0 = Control OFF
1 = Control ON
0 = Maximum frequency mode ON
1 = Maximum frequency mode OFF (Standard free-running frequency)
0 = Normal mode (Pulse width: 25µs)
1 = Pulse width narrow mode (Use when the FBP rise time from the HD rise is short.)
0h = –15% (Minimum size)
1Fh = 0%
3Fh = +15% (Maximum size)
(Set to ON modeat power-on.)
(Phase control according to HAFC parabola wave)
– 24 –
CXA2061S