AMLD-6015Z AIMTEC [AIMTEC], AMLD-6015Z Datasheet - Page 6

• Manufacturer Part Number: AMLD-6015Z
• Description: Up to 1000mA | LED Driver
• Manufacturer: AIMTEC [AIMTEC]

Output Current Adjustment by PWM Control:
Driving VADJ Directly
Driving VADJ Via Open Collector Transistor
The VADJ can also be driven via an open collector transistor as shown below.
The diode and resistor serve to suppress any possible high amplitude negative voltage spikes to the VADJ input resulting
from the collector to emitter capacitance of the transistor. Any negative voltage spikes will cause errors in output current
and/or unstable driver operation.
www.aimtec.com
F 051e R12.C
A Pulse Width Modulation (PWM) signal with a duty cycle DPWM can be applied to the ADJ pin as shown below.
1.25V
0V
PWM
GND
The output current is given by:
Iout ≈
VADJ
Ioutnom x DPWM
-Vin
AMLD-Z
Tel: [phone]
[if PWM frequency < 300Hz,
-Vout
+Vout
for 0.1<DPWM<1]
6 of 13
1
1
1
Last LED
st
LED
Up to 1000mA | LED Driver
Series AMLD-Z
Toll free: + 1 888 9 AIMTEC
North America only
(924 6832)