MAAMSS0045SMB MACOM [Tyco Electronics], MAAMSS0045SMB Datasheet - Page 4

• Manufacturer Part Number: MAAMSS0045SMB
• Description: High Dynamic Range Low Noise Amplifier 1400 - 2000 MHz
• Manufacturer: MACOM [Tyco Electronics]

4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
High Dynamic Range Low Noise Amplifier
1400 - 2000 MHz
Designer’s Kit MAAMSS0045SMB
MAAMSS0045 Evaluation Board
Recommended PCB Configuration
Layout View
The MAAMSS0045SMB Designer’s Kit allows for immediate evaluation of M/A-COM’s MAAMSS0045. The
Designer’s Kit includes an MAAMSS0045 mounted on an evaulation board and five loose MAAMSS0045’s. The
evaluation board consists of the recommended external surface mount circuitry, RF connectors, and a DC
multi-pin connector, all mounted to a multi-layer FR-4 PCB.
illustrated below with all functional ports labeled.
Compliant
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
Evaluation PCB & RF Connector Losses
Cross Section View
The DC connector on the Designer’s Kit PCB allows convenient
DC line access. This is accomplished by the one or more of the
following methods.
1.
2.
3.
The PCB dielectric between RF traces and RF ground layers should be
chosen to reduce RF discontinuities between 50 Ω lines and package
pins. M/A-COM recommends an FR-4 dielectric thickness of .008” (0.20
mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended
RF metalization is 1 ounce copper.
A mating female multi-pin connector (Newark Electronics
Stock # 46F-4658, not included).
Wires soldered to the necessary pins (not included).
Clip leads (not included).
RoHS
Port Reference
The MAAMSS0045SMB evaluation PCB is
RF Out
RF In
RF Traces & Components
RF Ground
DC Routing
Customer Defined
Approximate RF Loss
0.15 dB @ 1785 MHz
0.15 dB @ 1785 MHz
MAAMSS0045
V1