MAAP-000074-MCH000 MACOM [Tyco Electronics], MAAP-000074-MCH000 Datasheet - Page 7
![no-image](/images/no-image-200.jpg)
MAAP-000074-MCH000
Manufacturer Part Number
MAAP-000074-MCH000
Description
Amplifier, Power, 8W 2.0-8.0 GHz
Manufacturer
MACOM [Tyco Electronics]
Datasheet
1.MAAP-000074-MCH000.pdf
(8 pages)
7
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Amplifier, Power, 8W
2.0-8.0 GHz
Recommended Layout and Wire Bonding Configuration
In implementing the DC/ RF crossover shown, the following rules must applied.
In implementing the DC/ RF crossover shown, the following rules must applied.
1.
1.
2.
2.
3.
3.
4.
4.
Power Supply Sequencing:
Power Supply Sequencing:
Must apply negative bias to V
Must apply negative bias to V
Die Handling:
Die Handling:
Refer to Application Note AN3016.
Refer to Application Note AN3016.
Application%20Notes/index.htm.
Application%20Notes/index.htm.
the DC crossovers should approach and cross the RF trace at a 90 degree angle;
the DC crossovers should approach and cross the RF trace at a 90 degree angle;
the printed DC traces that approach the RF line should be stopped 2 substrate heights from the RF line edge;
the printed DC traces that approach the RF line should be stopped 2 substrate heights from the RF line edge;
the rated current capability of the DC crossovers should be greater than the maximum current of the device; and
the rated current capability of the DC crossovers should be greater than the maximum current of the device; and
the wires or ribbons used to make the DC crossovers should clear the RF trace by ~ 1 substrate height.
the wires or ribbons used to make the DC crossovers should clear the RF trace by ~ 1 substrate height.
GG
GG
before applying positive bias to V
before applying positive bias to V
All Application Notes may be accessed by going to http://www.macom.com/
All Application Notes may be accessed by going to http://www.macom.com/
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
DD
DD
to prevent damage to amplifier.
to prevent damage to amplifier.
MAAP-000074-PED000
Preliminary Datasheet
Rev —