LXMG221W-0700030-D0 MICROSEMI [Microsemi Corporation], LXMG221W-0700030-D0 Datasheet - Page 5
![no-image](/images/no-image-200.jpg)
LXMG221W-0700030-D0
Manufacturer Part Number
LXMG221W-0700030-D0
Description
30W 700mA Dimmable LED Driver Module
Manufacturer
MICROSEMI [Microsemi Corporation]
Datasheet
1.LXMG221W-0700030-D0.pdf
(8 pages)
Copyright © 2011
Rev. 1.0, 2012-04-17
The components have been judged on the basis of the required spacings in the Standard for Class 2 Power Units, UL 1310.
The input and output leads are 18 AWG, rated min. 300V, 105ºC, VW-1. The suitability of the leads shall be determined in each
end-use application. The leads are suitable for field wiring, except for when installed with alternate lead colors below, are
suitable for factory wiring only.
The polymeric housing is rated V-0 and has been subjected to a ball-impact and mold stress relief tests. The need for a suitable
enclosure shall be considered in the end product.
The component has been evaluated for dry and damp locations, where the humidity conditioning and dielectric tests were
conducted per UL 8750.
The maximum temperature measured on housing outside surface was 56°C during the Temperature Test when shifted to
Ambient Temperature 40°C. The temperature test was conducted without potting compound. The necessity for repeating the
Temperature Test shall be determined in each end use application.
A proper mechanical, electrical and fire enclosure shall be provided in the end-use application that is in compliance with all the
applicable requirements of the end-use application.
Testing was on a 20 A branch circuit. If used on a branch circuit greater than this, additional testing may be necessary.
The LED driver is rated as noted in the Electrical Ratings Table above, and the outputs comply with the requirements for Class 2.
The need for additional evaluation shall be considered in the end product if used beyond these ratings.
The LED driver is provided with dimmer leads for connecting an external dimmer. The leads colors are shown as below. The
dimmer circuit is considered as Class 2 circuit. The routing of the Dimming leads shall be determined in the end use application.
TM
One Enterprise, Aliso Viejo, CA. 92656, 800-877-6458, 949-380-6100, Fax: 949-215-4996
Lead Function
AC NEUTRAL
OUTPUT(+)
OUTPUT(-)
AC LINE
DIM(+)
DIM(-)
C O N D I T I O N S O F A C C E P T A B I L I T Y
Analog Mixed Signal Group
Microsemi
®
30W 700mA Dimmable LED Driver Module
P
LXMG221W-0700030-D0
RODUCTION
YELLOW
PURPLE
BROWN
GRAY
Color
BLUE
RED
D
ATASHEET
Page 5