PSU12V1AIN RFSOLUTIONS [rfsolutions.ltd], PSU12V1AIN Datasheet - Page 23

• Manufacturer Part Number: PSU12V1AIN
• Description: RF / IR Encoder / Decoder Chipset RF Evaluation Boards
• Manufacturer: RFSOLUTIONS [rfsolutions.ltd]

DS600-9 Sept ‘04
Typical Application
Configuring the outputs to operate with Transmitter Encoders
The principle of operation is as previously described in the operation of the RF600D.
Note that the on board RF600D will only operate the digital outputs of ‘pre-learnt’ transmitter
encoders. Upto 48 unique transmitters may be learnt. The Serial output will be valid whenever a
transmitter encoder is operated within range of the RF / IR receiver as long as the transmitter
encoder has a matching Manufacturers Key. (For a unique manufacturers key please contact our
sales Department) No ‘pre-learning’ of the transmitter encoder is required for the serial data output.
Therefore if a serial output is required from a pre-learnt transmitter encoder the digital and serial
outputs must be logically gated together (using a simple logic gate).
Using HyperTerminal to view the Serial Data
The data can be viewed using any PC running Windows HyperTerminal using the following configuration.
(Assume Com 1 is the port being used:)
To start HyperTerminal go to :-
Start > Programs > Accessories > Communications > HyperTerminal.
Select Hypertrm.exe
Enter a name and select an Icon.
The ‘Connect To’ dialog box should now be open.
Select “Direct to COM1” in the ‘Connect Using’ Field and select OK.
In the COM1 Properties Dialog Box set the fields with the following parameters:
Bits per Second:
Data Bits:
Parity:
Stop bits:
Flow control:
Upto 48 Transmitters
RF / IR Encoder / Decoder Chipset
RF Evaluation Boards,
9600
8
None
1
None
©2004 Reg. No. 227 4001, ENGLAND
Rx Decoder
SA123
T x Low Battery
4 Dig O/P's
Page 23
RF600E
RF600D