B1014-QT MIMIX [Mimix Broadband], B1014-QT Datasheet - Page 6

• Manufacturer Part Number: B1014-QT
• Description: 37.0-40.0 GHz GaAs MMIC
• Manufacturer: MIMIX [Mimix Broadband]

Handling and Assembly Information
Factory Automation and Identification
37.0-40.0 GHz GaAs MMIC
Buffer Amplifier, QFN
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems
without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or
systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to
perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a
significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be
reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high
volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be
taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids
or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress.
Component Orientation:
Note: Tape and Reel packaging is ordered with a -0G0T suffix. Package is available in 500 unit reels through designated sales channels.
Minimum order quantities should be discussed with your local sales representative.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for
eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit
and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper
alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C
reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
XB1014-QT-0G00
XB1014-QT-0G0T
XB1014-QT-EV1
Typical Reflow Profiles
January 2011 - Rev 10-Jan-11
Reflow Profile
Ramp Up Rate
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
Designator
• Do not ingest.
• Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-
• Observe government laws and company regulations when discarding this product.This product must be discarded in accordance with
Mimix
products are dangerous to the human body if inhaled, ingested, or swallowed.
methods specified by applicable hazardous waste procedures.
-QT
QFN (3x3mm)
Characteristic Data and Specifications are subject to change without notice. ©2011 Mimix Broadband, Inc.
Package
Type
Parts are to be oriented with the PIN 1 closest to the tape's round sprocket holes on the tape’s trailing edge.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
leads offered
Number of
Proper ESD procedures should be followed when handling this device.
SnPb
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
10-20 sec
4-6 ºC/sec
Description
Matte Tin plated RoHS compliant 3x3 16L QFN surface mount package in bulk quantity
Matte Tin plated RoHS compliant 3x3 16L QFN surface mount package in tape and reel
XB1014-QT evaluation board
16
their obligation to be compliant with U.S. Export Laws.
W Tape
Width
12mm
Appropriate precautions in handling, packaging
C a u t i o n : E S D S e n s i t i ve
and testing devices must be observed.
P
1
Component
Pitch
8mm
Pb Free
3-4 ºC/sec
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
4-6 ºC/sec
P
Pitch
4mm
0
Hole
329mm (13in)
Diameter
Reel
per Reel
Units
2000
B1014-QT
Page 6 of 6