DF15-30DP-0.65V HIROSE [Hirose Electric], DF15-30DP-0.65V Datasheet - Page 11

• Manufacturer Part Number: DF15-30DP-0.65V
• Description: 0.65mm Pitch SMT Board to Board Connector
• Manufacturer: HIROSE [Hirose Electric]

A296
BPrecautions
1. Recommended Temperature Profile ( SMT )
2. Recommended Manual Soldering Condition ( SMT )
3. Recommended Screen Thickness ( SMT )
4. Board Warp ( SMT )
5. Cleaning Condition
6. Cautions
Note1: Maximum twice action is allowed under the same condition. However, the interval between
Note2: The temperature indicates the board surface temperature in the connector lead area.
Soldering iron temperature: 290 10 , Soldering time: Within 2 seconds
0.15mm
Max 0.03mm in the connector center area, based on the both connector edges
Refer to the "Nylon Connector Use Hand book".
The receptacle is designed in a structure where contacts are exposed. Touching it with bare
hands would cause contact failure or electrostatic element damage.
Where no board is mounted, the insertion or extraction will cause damage or deformation in the contacts.
Avoid retaining the board with the connector only, and fix the board by any other means than the connector.
Excessive scoop insertion or extraction may result in damage.
In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector.
The color phase of this product may be slightly different from that of the formed product
according to the manufacturing lot. However, the difference doesn't affect the performance.
the first process and second actions must be maintained at the room temperature.