EM91865A EMC [ELAN Microelectronics Corp], EM91865A Datasheet - Page 5

• Manufacturer Part Number: EM91865A
• Description: 13 MEMORY TONE/PULSE DIALER WITH HF, HD, REDIAL AND VOLUME CONTROL FUNCTION
• Manufacturer: EMC [ELAN Microelectronics Corp]

* This specification are subject to be changed without notice.
Auto Insert Pause Time Function
EM91865 Provides a new function - Auto Insert Pause Time function - for PABX system user. In PABX
system, we usually use a special number to identify the phone want dial out or just a internal phone. So between
the first and second number, the PABX system will switch to central office, that will be few second switch time.
The auto insert pause time function will auto insert the pause time between first and second digit in redialing mode.
This function are provide a pause time to wait PABX switch to Central Office. In fact, the pause time are record
the waiting time of last dialing between the first and second digit. The auto insert pause minimum duration are equal
0 second, maximun duration are equal 3.5 second, and pause duration scale are 0.1 second. So, if the time during
user keying first and second digit are longer than 3.5 seconds, the auto insert pause time will be limited at 3.5 second.
By this function, we can redial the correct number out in PABX system. This function can select enable or disable
by R_option.
Pause(P) key operation
The Pause(P) key is designed to support pause operation in dialing duration. "P" key can be stored in memory
and it will occupy one digital position.
• To select Pulse or Tone mode.
• Off-hook(or turn on HF function), push (d1, d2,....dn, P , k1, k2, ..... ,kn). These numbers will be dialed out
SAVE redial memory
The SAVE memory is designed in EM91865 to support digits capacity buffer for second redial, pager, special
memory for memo and other system applications.
Storing : EM91865 support two operating methods to store numbers into SAVE redial memory.
Method 1 :
• To select Pulse or Tone mode.
• Off-hook(or turn on HF function), push d1, d2 ....., dn. The numbers d1, d2,..., dn will be dialed out in Pulse
• After dn had been dialed out and push [ST]. SAVE key. If the keying numbers are more than 32 digits that
• SAVE buffer are the length 32 digits number.
Method 2 :
On or Off-hook (or turn on HF function), push ST, d1, d2 ....., dn, [ST], SAVE. If the keying are not over 32 digits,
the numbers d1, d2, ....., dn will be stored in SAVE redial memory automatically.
Dialing
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function or after executing Flash function), first push SAVE key. The numbers stored
as following sequence :
d1, d2,.....dn, Tp, k1, k2, ..... ,kn (Tp are the pause Time)
or Tone mode as selection.
content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.
in SAVE memory will be dialed out in Pulse or Tone mode as selection.
Noted : In the [ ] key allows to be omitted.
13 MEMORY TONE/PULSE DIALER WITH HF, HD, REDIAL
AND VOLUME CONTROL FUNCTION
4.28.1999
EM91865
5