KAC-PS811D Kenwood, KAC-PS811D Datasheet - Page 6

no-image

KAC-PS811D

Manufacturer Part Number
KAC-PS811D
Description
(KAC-PS811D / KAC-X811D) Subwoofer Power Amplifier
Manufacturer
Kenwood
Datasheet
Display mode
You can set up the display items as follows:
1
2
3
Separate Amp Control
You can control sounds using the Amplifier Control function of the unit.
1
2
3
6
Amplifier Control System
Enter Menu mode
Press the [MENU] button.
"VOLT"/"CURR"/"TEMP"/"FAN" is displayed.
Select a display item
Press the [2] or [3] button.
The display items are switched in the following sequence.
Exit Menu mode
Press the [MENU] button for at least 1 second.
Enter Menu mode
Press the [MENU] button.
Select the Menu item
Press the [MENU] button.
The setup items are displayed approximately 1 second first, then the set
values are displayed.
Adjust the Menu item
Press the [2] or [3] button.
The setup items and set values are switched as follows.
Display
"VOLT"
"CURR"
"TEMP"
"FAN"
When the internal temperature is -22°F/-30°C or less, "-22F"/"-30C" is
displayed.
Display
"VOLT"/"CURR"/"TEMP"/"FAN"
"BASS"
"BA G"
"BA Q"
" EXT"
"VOL"
"TEMP"
"DEFA"
"AMP"
English
NOTE
Range
60/80/100/200 (Hz)
B–15 — B+15 (dB)
Q1.00/Q1.25/Q1.50/Q2.00
ON/OFF
–20 — 0 (dB)
FAHR (Fahrenheit) or
CELS (Centigrade)
0 — 7
Information
Indicates the source voltage (V).
Indicates the current consumption (A).
Indicates the internal temperature (°F/°C).
Indicates the rotation speed of the cooling fan in 3 steps: "FAST", "SLOW" or "OFF".
Adjustment Item
For the operation method refer to 'Display mode'
Bass Center Frequency
Bass level
Bass Q Factor
When the bass extend is set to ON, low frequency response is
extended by 20%.
Volume offset
The Fahrenheit or Centigrade temperature unit can be selected
for the Display mode.
For the operation method refer to 'Default'
The ID Number you have assigned is displayed.
���
���
���
��
��
��
��
�� ��
��� ���������
���
���
��� ���
4
Default
Resets all values you have set to the initial (default) values.
1
2
3
4
Display Demonstration
The "VOLT"/"CURR"/"TEMP"/"FAN" items are displayed repeatedly.
Canceling the Demonstration mode
Exit Menu mode
Press the [MENU] button for at least 1 second.
Enter Menu mode
Press the [MENU] button.
Select Default mode
Press the [MENU] button.
Select the "DEFA" display.
Resets the value to its default
Press the [3] button for at least 2 seconds.
Message "----" is displayed, and the value is initialized.
Exit Menu mode
Press the [MENU] button for at least 1 second.
Press the [MENU] button for at least 2 seconds.
The indicator flashes in the Demonstration mode.
Press any button to cancel the Demonstration mode.
When you hold down the [3] button 3 or more seconds during ID number
display ("AMP"), message "MEMO" is displayed and you can register the values
you have set with the Amplifier Control. To call the Amplifier Control’s values,
hold down the [2] button 3 or more seconds during ID number display
("AMP"). Then, you can recall the value when message "LOAD" is displayed.
Volume offset value can not be initialized.
��
����
NOTE
NOTE
��� ��
��� ��
��� ��
�� ��
�� ��
��� ����
����
��
���
���
������
��������������
����
����
�����
�����
���°
�°
��������
���
���
��
���
�������������
�����
���
��
����
���
���
���
���
��
���
�������������
��� ���������
��
�����
����
����
���
Indicator
MENU
2 / 3

Related parts for KAC-PS811D