LC-RB0610P Panasonic - BSG, LC-RB0610P Datasheet - Page 6
![no-image](/images/no-image-200.jpg)
LC-RB0610P
Manufacturer Part Number
LC-RB0610P
Description
BATT SEALED LEAD ACID 6V 10.0AH
Manufacturer
Panasonic - BSG
Specifications of LC-RB0610P
Voltage - Rated
6V
Capacity
10Ah
Rechargeability
Yes
Lead Free Status / RoHS Status
Contains lead / RoHS compliant by exemption
Size / Dimension
-
Termination Style
-
Other names
LC-RB06101P
LCR6V10BP
LCR6V10PA
P170
LCR6V10BP
LCR6V10PA
P170
Supplemental Information on Panasonic Valve-Regulated Lead Acid Batteries (Cont.)
How the 1-800-SAV-LEAD Recycling Program Works
1) We encourage all of our customers to serve as VRLA collection centers for your customers, thereby
2) All shipments to our national consolidation facility must be prepaid. No freight collect shipments will
3) Panasonic will maintain on file all necessary documentation for EPA reference.
4) All batteries must be shipped, prepaid to Ebco Battery Company that serves as our national
5) Only VRLA batteries that meet the U.S. Department of Transportation (DOT) “NON-SPILLABLE” (49
6) Panasonic reserves the right to alter or discontinue this program at any time.
Packaging Requirements
1)
2)
3)
4)
5)
6)
7)
Exception:
Full-Truck-Loads – All full-truck-load shipments of VRLA batteries must be scheduled 48 hours in
advance. To schedule shipments to our consolidation site, please be sure to fax a scheduling request
(including contact name and phone number) to Ebco Battery Company at fax: (706) 569-6774.
Consumer Users of Panasonic VRLA Batteries
All Panasonic VRLA batteries are chemically identical to common automotive starter batteries and can be
returned to any site that accepts automotive lead acid batteries for recycling. Examples include retailers
of automotive batteries, automotive service centers, scrap metal dealers, etc…
For additional information on this program or information on how to recycle other Panasonic batteries
please call your local Panasonic Battery Sales Group sales office.
Panasonic
Panasonic Industrial Company
A Division of Panasonic Corporation of North America
5201 Tollview Drive, 1F-3
Rolling Meadows, IL 60008
Toll Free:
Fax:
e-mail:
Internet:
SHIPPING ADDRESS:
Ebco Battery Company
4017 Warm Springs Road
Columbus, Georgia 31909
establishing a reverse distribution network between the end user and the secondary lead recycling
facility.
be accepted. All freight collect and non-VRLA batteries will be returned to the shipper.
provided upon request.
consolidation facility. (See exception below).
CFR 173.159(a) requirements will be accepted by this program.
All VRLA batteries must be fully discharged and packaged in a manner as to insure safe handling and
conform to all applicable DOT regulations. (49 CFR 173.159a). A dab of silicon caulking or non-
conductive tape on each terminal will ensure that no direct shorts occur during shipment.
VRLA battery shipments should be made in pallet quantities whenever possible.
Palletized shipments should be secured with metal bands or poly-wrapped with stack height limited to
four (4) feet.
VRLA batteries shipped on pallets should be of uniform size or be stacked with the larger batteries on
the bottom.
VRLA batteries should be stacked upright in a head-to-base arrangement. Each layer should be
separated by cardboard to prevent accidental shorting.
Smaller quantities of VRLA batteries may be shipped via standard UPS. Be sure that each box does
not exceed the UPS weight limit of 70 lbs. A dab of silicon caulking or non-conductive tape on each
terminal will ensure that no shorts occur during shipment.
The outside of every pallet and individual box must be labeled “NON-SPILLABLE” as required by
DOT regulations. This label must be visible during transportation.
oembatteries@us.panasonic.com
www.panasonic.com/batteries
Batteries
877 -726- 2228
847-637-4660
A copy will be