EDS6-85E FUJI [Fuji Electric], EDS6-85E Datasheet - Page 4

• Manufacturer Part Number: EDS6-85E
• Manufacturer: FUJI [Fuji Electric]

4
FHC, FKC ... 2
Process-wetted parts material:
Non-wetted parts material:
Environmental protection:
Mounting:
Mass{weight}:
Indicator:
Arrester:
Oxygen service: Special cleaning procedures are followed
symbols)
(7th digit
Material
in Code
Optional features
code
M
H
U
V
T
B
L
Process cover
316 stainless
steel(*1)
316 stainless
steel(*1)
316 stainless
steel(*1)
316 stainless
steel(*1)
Notes: (*1) SCS14 per JIS G 5121
Remark:
Monel lining
Hastelloy-C
Tantalum
lining
lining
Sensor O-rings: Viton and teflon selectable.
Availability of above material design depends on
ranges and static pressure. Refer to “Code sym-
bols”.
Electronics housing: Low copper die-cast
Bolts and nuts: Cr-Mo alloy (standard),
Fill fluid: Silicone oil (standard) or fluori-
Mounting bracket: Carbon steel with ep-
IEC IP67 and NEMA 4X
On 60.5mm(JIS 50A) pipe using mounting
bracket, direct wall mounting, or direct
process mounting.
Transmitter approximately 4.4kg without
options.
Add; 0.5kg for mounting bracket
A plug-in analog indicator (1.5% accuracy)
can be housed in the electronics compart-
ment or in the terminal box of the hous-
ing.
An optional 4
available.
A built-in arrester protects the electronics
from lightning surges.
Lightning surge immunity:
4kV (1.2
throughout the process to maintain all pro-
cess wetted parts oil-free.
The fill fluid is fluorinated oil.
aluminum alloy (standard), finished
with epoxy/polyurethane double coat-
ing, or 316 stainless steel, as specified.
304 stainless steel (for static pressure
code “1”, “2”, and “3” only), or 630
stainless steel (for static pressure code
“3” and “4” only). Static pressure rat-
ing for code “3” with 304 stainless
steel bolts is degraded to 10MPa.
nated oil (Daifloil)
oxy coating or 304 stainless steel, as
specified
316L stainless
steel
Hastelloy-C
Hastelloy-C
Diaphragm
Tantalum
Tantalum
0.8kg for indicator option
4.5kg for stainless steel housing
Monel
Monel
50 s)
1
2
option
316 stainless
steel
digits LCD meter is also
sensor body
Monel lining
Monel lining
Hastelloy-C
Hastelloy-C
Tantalum
Tantalum
Wetted
lining
lining
lining
lining
316 stainless
steel
316 stainless
steel
316 stainless
steel
316 stainless
steel
Hastelloy-C
Vent/drain
Tantalum
Monel
Chlorine service: The fill fluid is fluorinated oil.
Degreasing:
NACE specification:
Vacuum service: Special silicone oil and filling procedure
Fig. 1 Relation between process temperature and
Customer tag:
Coating of cell:
ACCESSORIES
Oval flanges:
Equalizing valves:
Hand-held communicator:
Communication module: (standard for model FKC)
[kPa abs]
{mbar abs}
operating pressure
{1010}
{200}
101
{40}
2.7
{27}
20
4
–40
Process temperature[ C ]
Silicone oil (Code:Y,G,N)
fill fluid is standard silicone oil. Not for use
on oxygen or chlorine measurement.
ary parts comply with NACE MR-01-75.
ASTM B7M or L7M bolts and 2HM nuts
(Class II) are available.
MPa) is degraded to 10MPa.
are applied.
data is wired to the transmitter.
urethane double coating. Specify if envi-
ronment is extremely corrosive.
EDS6-10)
NPT or to Rc1/2; in carbon steel or in 316
stainless steel.
EDS6-10)
and in pressure rating 16MPa or 42MPa.
8-47)
remote setting function becomes avail-
able.
Process-wetted parts are cleaned, but the
Metallic materials for all pressure bound-
Static pressure rating for code “3” (16
See figure
A stainless steel tag with customer tag
Cell's surface is finished with epoxy/poly-
(Model FFP, refer to Data Sheet No.
Converts process connection to 1/2-14
(Model FFN, refer to Data Sheet No.
Available in CS or in 316 stainless steel
(Model FXW, refer to Data Sheet No. EDS
When using this module for model FHC,
Remark: When the communication module is con-
–15
None-operating
area
Silicone oil (Code:R)
Operating
area
nected, the operation mode of external
zero/span adjustable screw is changed to
zero adjustment.
60
1.
85 120