9365894001 Tyco Electronics, 9365894001 Datasheet - Page 2

• Manufacturer Part Number: 9365894001
• Description: Heat Shrinkable Tubing and Caps
• Manufacturer: Tyco Electronics

Specification values
Physical
Electrical
Chemical
Typical performance values
Electrical
Adhesive Properties
(MT5000A only)***
*Trademark of Johnson & Johnson Company
†Or equivalent dilute glutaraldehyde sterilizing solution.
Note: Consult the MT5000 SCD for specific details about test procedures.
Altera and Raychem are trademarks of Tyco Electronics Corporation. Teflon is a trademark of E.I. du Pont de Nemours and Company.
Users should independently evaluate the suitability of the product for their application.
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025-1164
USA
Tel: [phone] (US & Canada)
Tel: [phone] (All other countries)
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
For more information about this product visit www.tycoelectronics.com
Property
Dimensions
Longitudinal change
Concentricity as supplied
Tensile strength
Ultimate elongation
Secant modulus (recovered)
Heat resistance
(168 hours at 125°C/257°F)
Followed by test for:
Ultimate Elongation
Dielectric strength
Dielectric withstand
3000 V, 60 Hz
Fluid resistance
(24 hours at 23°C/73°F) in:
Isopropyl Alcohol
5% Saline Solution
Cidex*†
Followed by tests for:
Dielectric strength
Tensile strength
Heavy metals analysis
Cadmium
Mercury
Lead
Bismuth
Antimony
Property
Dielectric strength**
0.005” < IWT
0.010” < IWT
0.015” < IWT
Ring and bell softening point
Adhesion to:
Polypropylene
HDPE
Polyurethane
PVC
Steel
**IWT = Installed wall thickness. ***Not recommended for use on Teflon or silicone substrates.
0.010”
0.015”
0.020”
Faraday Road
Dorcan, Swindon, SN3 5HH
United Kingdom
Tel: [phone]
Unit
mm (inches)
percent
percent
psi (Mpa)
percent
psi (Mpa)
percent
volts/mil (volts/mm)
seconds
volts/mil (volts/mm)
psi (Mpa)
ppm
Unit
volts/mil (volts/mm)
°C
3816 Noborito, Tama-ku
Kawasaki, Kanagawa 214-8533
Japan
Tel: [phone]
Requirement
See reverse
+0, -10
70 minimum
1800 (12.4) minimum
200 minimum
2.5 X 10
100 minimum
500 (19,680) minimum
60 minimum
500 (19,680) minimum
1800 (12.4) minimum
1 maximum (total of all metals)
Performance
1500 (59,055)
1000 (39,370)
600 (23,622)
121 ± 5
Poor
Fair
Good
Good
Excellent
4
(172) maximum
Asia Pacific Headquarters
26 Ang Mo Kio, Industrial Park 2
Singapore 569507
Tel: [phone]
Method of test
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
USP XXII
Physiochemical
Test - Plastics
Method of test
ASTM D 2671
ASTM E 28