ADS-927MC-C Murata, ADS-927MC-C Datasheet - Page 5

no-image

ADS-927MC-C

Manufacturer Part Number
ADS-927MC-C
Description
converter. 5v input range, no pipeline delay, 0 c to +70 c temperature range, rohs compliant....
Manufacturer
Murata
Datasheet
DATEL
THERMAL REQUIREMENTS
All DATEL sampling A/D converters are fully characterized and speci-
fi ed over operating temperature (case) ranges of 0 to +70°C and –55
to +125°C. All room-temperature (T
performed without the use of heat sinks or forced-air cooling. Thermal
impedance fi gures for each device are listed in their respective specifi ca-
tion tables.
These devices do not normally require heat sinks; however, standard
precautionary design and layout procedures should be used to ensure
®
INTERNAL S/H
CONVERT
OUTPUT
START
DATA
EOC
10ns
A
typ.
= +25°C) production testing is
Notes: 1. f
Data (N – 1) Valid
200ns
±25ns
®
2. The ADS-927 is a pulse-triggered device. Its internal operations
N
• 11 Cabot Boulevard, Mansfi eld, MA 02048-1151 USA • Tel: (508) 339-3000 • www.datel.com • e-mail: help@datel.com
are triggered by both the rising and falling edges of the start
convert pulse. When sampling at 1MHz, the start pulse must be
between 175 and 225nsec wide. For lower sampling rates, wider
start pulses may be used, however, a minimum pulse width low of
50nsec must be maintained.
s
= 1MHz.
610ns typ.
Conversion Time
Hold
480ns ±20ns
10ns typ.
Figure 4. ADS-927 Timing Diagram
Invalid
Data
Acquisition Time
390ns ±55ns
devices do not overheat. The ground and power planes beneath the package,
as well as all pcb signal runs to and from the device, should be as heavy as
possible to help conduct heat away from the package.
Electrically-insulating, thermally-conductive "pads" may be installed
underneath the package. Devices should be soldered to boards rather than
"socketed," and of course, minimal air fl ow over the surface can greatly help
reduce the package temperature.
70ns ±10ns
14-Bit, 1MHz, Low-Power Sampling A/D Converters
35ns max.
150ns max.
N + 1
Data N Valid (850ns min.)
01 Apr 2011 MDA_ADS-927.B02 Page 5 of 8
ADS-927

Related parts for ADS-927MC-C