MAX11624EEG+T Maxim Integrated, MAX11624EEG+T Datasheet - Page 20

• Manufacturer Part Number: MAX11624EEG+T
• Description: Analog to Digital Converters - ADC 10-Bit 16Ch 300ksps 5V Precision ADC
• Manufacturer: Maxim Integrated

Specifications of MAX11624EEG+T

• Rohs: yes
• Number Of Channels: 16
• Architecture: SAR
• Conversion Rate: 300 KSPs
• Resolution: 10 bit
• Input Type: Single-Ended
• Interface Type: 3-Wire (SPI, Microwire), QSPI
• Operating Supply Voltage: 4.75 V to 5.25 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Power Dissipation: 762 mW
• Minimum Operating Temperature: - 40 C
• Number Of Converters: 1
• Voltage Reference: 4.096 V

Integral nonlinearity (INL) is the deviation of the values
on an actual transfer function from a straight line. This
straight line can be either a best-straight-line fit or a line
drawn between the end points of the transfer function,
once offset and gain errors have been nullified. INL for
the MAX11618–MAX11621/MAX11624/MAX11625 is
measured using the end-point method.
Differential nonlinearity (DNL) is the difference between
an actual step width and the ideal value of 1 LSB. A
DNL error specification of less than 1 LSB guarantees
no missing codes and a monotonic transfer function.
Aperture jitter (t
the time between the samples.
Aperture delay (t
edge of the sampling clock and the instant when an
actual sample is taken.
For a waveform perfectly reconstructed from digital
samples, signal-to-noise ratio (SNR) is the ratio of the
full-scale analog input (RMS value) to the RMS quanti-
zation error (residual error). The ideal, theoretical mini-
mum analog-to-digital noise is caused by quantization
error only and results directly from the ADC’s resolution
(N bits):
In reality, there are other noise sources besides quanti-
zation noise, including thermal noise, reference noise,
clock jitter, etc. Therefore, SNR is calculated by taking
the ratio of the RMS signal to the RMS noise, which
includes all spectral components minus the fundamen-
tal, the first five harmonics, and the DC offset.
10-Bit, 300ksps ADCs
with FIFO and Internal Reference
20
______________________________________________________________________________________
SNR = (6.02 x N + 1.76)dB
AJ
) is the sample-to-sample variation in
AD
) is the time between the rising
Differential Nonlinearity
Signal-to-Noise Ratio
Integral Nonlinearity
Aperture Delay
Aperture Jitter
Definitions
Signal-to-noise plus distortion (SINAD) is the ratio of the
fundamental input frequency’s RMS amplitude to the
RMS equivalent of all other ADC output signals:
Effective number of bits (ENOB) indicates the global
accuracy of an ADC at a specific input frequency and
sampling rate. An ideal ADC error consists of quantiza-
tion noise only. With an input range equal to the full-
scale range of the ADC, calculate the effective number
of bits as follows:
Total harmonic distortion (THD) is the ratio of the RMS
sum of the first five harmonics of the input signal to the
fundamental itself. This is expressed as:
where V1 is the fundamental amplitude, and V2–V5 are
the amplitudes of the 2nd through 5th-order harmonics.
Spurious-free dynamic range (SFDR) is the ratio of the
RMS amplitude of the fundamental (maximum signal
component) to the RMS value of the next-largest distor-
tion component.
PROCESS: BiCMOS
For the latest package outline information and land patterns
(footprints), go to www.maxim-ic.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
THD
PACKAGE
16 QSOP
24 QSOP
TYPE
SINAD (dB) = 20 x log (Signal
=
20 x log
ENOB = (SINAD - 1.76)/6.02
Signal-to-Noise Plus Distortion
Spurious-Free Dynamic Range
PACKAGE
⎛
⎜
⎝
CODE
E16+5
E24+3
(
Package Information
V2
Total Harmonic Distortion
Effective Number of Bits
2
+
Chip Information
V3
OUTLINE
21-0055
21-0055
2
NO.
+
RMS
V4
/Noise
2
PATTERN NO.
+
V5 /V1
90-0167
90-0172
LAND
RMS
2
)
)
⎞
⎟
⎠