XRA1403IG24-F Exar, XRA1403IG24-F Datasheet - Page 20

• Manufacturer Part Number: XRA1403IG24-F
• Description: Interface - I/O Expanders 16 Bit SPI GPIO Expander
• Manufacturer: Exar

Specifications of XRA1403IG24-F

• Rohs: yes
• Maximum Operating Frequency: 15 MHz
• Operating Supply Voltage: 1.65 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• Mounting Style: SMD/SMT
• Package / Case: TSSOP-24
• Output Current: 160 mA
• Power Dissipation: 200 mW

7.5 Production and Service Provision
7.5.2 Validation of Processes for Production Provision
7.5.3 Identification and Traceability
7.5.4 Customer Property
7.5.5 Preservation of Product
7.5.1 Control of Production
Technical process specifications necessary for production control are prepared by the respective
manufacturing, test or product engineer. These documents contain the process details (working steps,
equipment to be used, machine parameters, related documents and forms) and are applied by qualified
personnel working with appropriate equipment.
Document Control.
Necessary steps are carried out following the written instructions on the manufacturing instruction.
Production results are recorded on the manufacturing instructions or logs for each process step.
Equipment used for production is selected by the responsible managers and engineers on the basis of
its ability to perform the intended function. Measuring & test equipment used to verify the quality of the
product is subject to calibration prior to being included in the production process. Regular preventive
maintenance of equipment is performed and recorded.
Critical production steps, such as planning, scheduling and shipping of products on time, are monitored
on a regular basis to assure that all parameters are within the specified limits.
Conformance to specified limits and conditions and mechanical performance of the end product are
assured by performing electrical test on 100% of each production lot and sample or 100% final
visual/mechanical inspection, depending on the Exar product line. All guaranteed electrical parameters
are validated through testing, correlation, or characterization. Additionally, critical mechanical
parameters are monitored as required. Test equipment is checked for calibration and preventive
maintenance prior to use.
Identification and traceability are assigned according to the applicable procedures. Functional
departments must ensure that the documentation accompanying product, such as production,
inspection and test records, and the electronic manufacturing tracking systems contain the correct
product identification and traceability. Examples of these are:
Production lot numbers are identifiable at any production stage. Production status and process history,
including direct material, shall be identifiable for every production lot.
Material in process shall be identified such that it can be determined where the material is located in the
production flow. Identification has to be sufficient to prevent accidental movement of the product.
Procedures for identification, verification, and protection of Customer supplied product have been
defined in the applicable specs. Customer supplied product must be clearly identified as such. Until the
use or installation of these products, they shall be kept segregated under conditions which protect them
from damage. If Customer supplied product is lost, damaged, or otherwise becomes unsuitable for use,
it shall be treated under the control of nonconforming product described in section 8.3 of this manual
and shall be reported to the Customer for disposition.
Preservation of product including identification, handling, transportation, storage, packing and delivery
within Exar, from receiving of material to shipping of finished product have been defined in the
applicable procedures. These procedures are designed to avoid damage, deterioration and mishandling
of product.
TITLE:
a) Sales assigns order numbers via the ERP system.
b) Inventory Control assigns lot numbers for wafer sort and subsequent processing steps.
c) Manufacturing controls the proper marking of the product by the supplier.
d) Shipping generates the packing slip and bar code labeling.
Exar Quality Manual
FOR REFERENCE ONLY
The formal document system is maintained by
SPEC #: QA031
REV: QQ
PAGE
20 of 26