FT313HQ-R FTDI, FT313HQ-R Datasheet - Page 18

no-image

FT313HQ-R

Manufacturer Part Number
FT313HQ-R
Description
USB Interface IC USB High Speed USB-- Host Controller IC--
Manufacturer
FTDI
Datasheet

Specifications of FT313HQ-R

Rohs
yes
Product
USB 2.0
Data Rate
480 Mbps
Interface Type
USB
Operating Supply Voltage
1.62 V to 3.63 V
Operating Supply Current
35 mA
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Package / Case
QFN-64
Minimum Operating Temperature
- 40 C

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
FT313HQ-R
Quantity:
2 050
Company:
Part Number:
FT313HQ-R
Quantity:
2 050
4.9 Power management
4.9.1 Power up and reset sequence
When VCC(I/O) and VCC(3V3) are on, an internal regulator will power on with VCC(3V3) on.
An internal POR pulse will be generated during the regulator power on, so that internal circuits
are in reset state until the regulator power is stable.
4.9.2 Power supply
Power supplies are defined in Table 4.4.
Table 4-4 Power supply
4.9.3 ATX reference voltage
The ATX circuit provides a stable internal voltage reference (+1.2V) to bias the analog
circuitry. This circuit requires an accurate external reference resistor. Connect 12kΩ±1%
resistor between pins RREF and GND.
4.9.4 Power modes
Power management configuration defined in Table 4.5.
For each bit description, see CONFIG register.
Table 4-5 power management configuration
4.9.4.1 Operation mode
All power supplies are present. Host controller is active.
4.9.4.2 Suspend mode
All power supplies are present. Host controller goes to USB suspend.
The steps for the host suspend are as follows:
VCC(3V3)
VCC(I/O)
Symbol
1. Clear the RS bit of the USBCMD register to stop the host controller from executing
2. Set the PO_SUSP bit of the PORTSC register to force the host controller to go into
3. Disable OSC_EN, PLL_EN and HC_CLK_EN bits of the CONFIG register to save power.
4. Clear the U_SUSP_U bit of the EOTTIME register to put the chip into suspend mode.
OSC_EN
schedule.
suspend.
1
0
1.8V, or 2.5V, or 3.3V
Copyright © 2012 Future Technology Devices International Limited
Typical
3.3V
PLL_EN
1
0
Supply for digital I/O pad
Supply for chip
FT313H USB2.0 HS Host Controller Datasheet Version 1.1
HC_CLK_EN
1
0
Description
Operation mode
Suspend mode
Description
Document No.: FT_000589
Clearance No.: FTDI# 318
18

Related parts for FT313HQ-R