FT201XS-R FTDI, FT201XS-R Datasheet - Page 34
FT201XS-R
Manufacturer Part Number
FT201XS-R
Description
USB Interface IC USB to I2C IC SSOP-16
Manufacturer
FTDI
Datasheet
1.FT201XQ-R.pdf
(49 pages)
Specifications of FT201XS-R
Rohs
yes
Product
USB 2.0
Data Rate
12 Mbps, 480 Mbps
Interface Type
I2C, USB
Operating Supply Voltage
2.97 V to 5.5 V
Operating Supply Current
6.4 mA to 8.65 mA
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Package / Case
SSOP-16
Tradename
X-Chip
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
FT201X USB I2C SLAVE IC Datasheet
Version 1.3
Document No.: FT_000627 Clearance No.: FTDI# 264
Further details of these states can be found in Chapter 9 of the USB 2.0 Specification from the USB
Implementers Forum website (http://www.usb.org).
Figure 9.6: Checking the USB State
Device ID command
This command uses the Slave address of the FT-X. The master issues the 1111 100 0 command (0x7c
write) followed by the slave address with the direction bit as either 0 or 1 (don’t care). The master then
sends a repeated start followed by the 1111 100 1 command (0x7c read). The FT-X responds with 3
bytes containing the manufacturer ID (12 bits), part ID (9 bits) and revision (3 bits). The master ends
reading with a NACK.
Note: In the case where the master keeps ACKing the data, it has to wrap around and the slave (the FT-
X) will keep sending the 3 bytes of its ID.
Figure 9.7: Reading the Device ID
Copyright © 2013 Future Technology Devices International Limited
34