MAX9502GEVKIT+ Maxim Integrated, MAX9502GEVKIT+ Datasheet - Page 3

• Manufacturer Part Number: MAX9502GEVKIT+
• Description: Video Amplifiers Evaluation Kit for the MAX9502G/MAX9502M
• Manufacturer: Maxim Integrated

Specifications of MAX9502GEVKIT+

• Supply Current: 5.3 mA
• Maximum Power Dissipation: 168 mW
• Snr: 68 dB
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2.5 V

Figure 2. 100 IRE Multiburst Signal—Sync Tip Below Ground
3) Connect the BNC OUT connector (J2) to the TV
4) Set the power supplies to 3V and then turn off
5) Connect the negative terminal of the power supply to
6) Connect the positive terminal to the V
7) Turn on the power supply.
8) Turn on the video signal generator and the VM700T.
monitor.
power.
the GND loop (J4) on the MAX9502G dual-package
EV kit.
on the MAX9502G dual-package EV kit.
_______________________________________________________________________________________
MAX9502G Dual-Package Evaluation Kit
CC
pad (J3)
The MAX9502G dual-package EV kit is a fully assem-
bled and tested surface-mount printed-circuit board
(PCB) that contains a MAX9502GELT+T (µDFN pack-
age) and a MAX9502GEXK+T (SC70 package). The
MAX9502G/MAX9502M is a complete solution to inter-
face a video DAC to a TV monitor. The MAX9502G
dual-package EV kit is self-contained, requiring only a
3V external power supply. The MAX9502G/MAX9502M
drive a long video cable without loss of quality. The
MAX9502G dual-package EV kit provides a shutdown
pin that reduces current consumption to a minimum
for power-saving features. Two jumpers (JU1 and
JU4) at the BNC IN and BNC OUT connectors allow
switching between the different packages.
Detailed Description
3