uDRIVE-uSD-G1 4D Systems, uDRIVE-uSD-G1 Datasheet - Page 8

• Manufacturer Part Number: uDRIVE-uSD-G1
• Description: Solid State Drives - SSD Tiny Disk Drive Data Storage Mod
• Manufacturer: 4D Systems

Specifications of uDRIVE-uSD-G1

• Rohs: yes
• Operating Supply Voltage: 3.6 V to 5.5 V
• Maximum Operating Temperature: + 100 C
• Connector Type: UART
• Dimensions: 14.9 mm x 18.9 mm x 3.5 mm
• Minimum Operating Temperature: - 40 C

6. Development and Support Tools
6.1
The ‘PmmC Loader’ is a free software tool for
Windows based PC platforms. Use this tool to
program the latest PmmC file into the GOLDELOX-
DOS chip embedded in the uDRIVE module. It is
available for download from the 4D Systems
website,
6.2
The micro-USB module is a USB to Serial bridge
adaptor that provides a convenient physical link
between the PC and the uDRIVE module. A range of
custom made micro-USB devices such as the uUSB-
MB5 and the uUSB-CE5 are available from 4D
Systems (must be purchased separately). The micro-
USB module is an essential tool for PmmC
programing as well as for using the 4D Fat Controller
software tool.
© 2011 4D Systems
micro-DRIVE (uDRIVE-uSD-G1)
Tool
PmmC Loader–Software Programming
Tool
microUSB – Hardware Programming
www.4dsystems.com.au
uUSB-MB5
uUSB-CE5
www.4dsystems.com.au
6.3
The 4D Fat Controller is a free software tool to test
all of the functionality of the uDRIVE module. Files
can be removed, read and written directly to the
memory card on the module. The software tool not
only tests all of the high level file handling
capability, it also allows the user to test the raw
byte level read/write options. For raw read/write,
the ‘Protected FAT’ check box needs to be
unchecked. The user can also do random tests,
available under the ‘Test’ tab.
It is available for download from the 4D Systems
website,
7. Mechanical Details
4D FAT Controller – Software Test
Tool
www.4dsystems.com.au
Page 8 of 10
Data Sheet