Z4A2321 Memtech, Z4A2321 Datasheet - Page 76

• Manufacturer Part Number: Z4A2321
• Description: Solid State Drives - SSD 32GB DRIVE IND TEMP
• Manufacturer: Memtech

Specifications of Z4A2321

• Product Category: Solid State Drives - SSD
• Product: SATA Flash Drives
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C

60
Electrostatic Discharge (ESD)
The SSD will meet the ESD limits specified in the 61000-4-2 guidelines and the customer’s enhanced
ESD procedure. The specification will determine whether the contact or air discharge method should
be used. Performance degradation is defined as a decreased throughput rate. No data error are
allowed. Table 23 lists the ESD requirements.
Acceptance Criteria Definitions
The following table lists the acceptance criteria definitions for the ESD limits.
Ambient Temperature
Relative Humidity
Atmospheric Pressure
Voltage Level
A
B
C
+/-12 kV
+/-15 kV
+/--2 kV
+/- 6 kV
+/-2 kV
+/-4 kV
+/-8 kV
+/-4 kV
+/-8 kV
The apparatus will continue to operate as intended, i.e., normal unit
operation with no degradation of performance.
The apparatus will continue to operate as intended after completion of the
test. However, during the test, some degradation of performance is
allowed provided there is no data loss or operator intervention to restore
apparatus function.
Temporary loss of function is allowed. Operator intervention is acceptable
to restore apparatus function.
Note: Hardware failures are not acceptable for any level of the above
performance criteria.
Table 24.
Table 23.
15
30% to 60%
86kPa (860 mbar) to 106 kPa (1060 mbar
o
C to 35
Acceptance Criteria Definitions
Discharge Type
Climatic Conditions
Contact
Contact
Contact
Contact
o
C
Air
Air
Air
Air
Air
ESD Requirements
Pass/Fail Performance Criteria
Zeus 2.5-Inch ATA Solid State Drive
C
C
A
B
B
A
A
B
B