93LC86C-I/P Microchip Technology, 93LC86C-I/P Datasheet - Page 10

• Manufacturer Part Number: 93LC86C-I/P
• Description: IC EEPROM 16KBIT 3MHZ 8DIP
• Manufacturer: Microchip Technology

Specifications of 93LC86C-I/P

• Memory Size: 16K (2K x 8 or 1K x 16)
• Package / Case: 8-DIP (0.300", 7.62mm)
• Operating Temperature: -40°C ~ 85°C
• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Speed: 3MHz
• Interface: Microwire, 3-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Organization: 1 K x 16 or 2 K x 8
• Interface Type: Microwire
• Maximum Clock Frequency: 2 MHz
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Maximum Operating Current: 3 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 2.5 V, 5.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
2.9
The Write All (WRAL) instruction will write the entire
memory array with the data specified in the command.
The self-timed auto-erase and programming cycle is
initiated by the rising edge of CLK on the last data bit.
Clocking of the CLK pin is not necessary after the
device has entered the WRAL cycle. The WRAL
command does include an automatic ERAL cycle for
the device. Therefore, the WRAL instruction does not
require an ERAL instruction but the chip must be in the
EWEN status.
FIGURE 2-7:
DS21797D-page 10
CLK
DO
CS
DI
WRITE ALL (WRAL)
1
HIGH-Z
WRAL TIMING
0
0
0
1
X
•••
X
The DO pin indicates the READY/BUSY status of the
device if CS is brought high after a minimum of 250 ns
low (T
V
Dx
CC
Note:
must be
CSL
•••
).
Issuing a Start bit and then taking CS low
will clear the READY/BUSY status from
DO.
D0
4.5V for proper operation of WRAL.
T
CSL
T
WL
BUSY
 2004 Microchip Technology Inc.
T
SV
READY
HIGH-Z
T
CZ