MAX4827ELT-T Maxim Integrated, MAX4827ELT-T Datasheet
![no-image](/images/no-image-200.jpg)
MAX4827ELT-T
Specifications of MAX4827ELT-T
Related parts for MAX4827ELT-T
MAX4827ELT-T Summary of contents
Page 1
... The switch remains on after the overload condition disappears. The MAX4826–MAX4831 operate over the extended -40°C to +85°C temperature range, and are available in a tiny space-saving, 1mm x 1.5mm, 6-pin µDFN package. PART PIN-PACKAGE MAX4826ELT+T 6 μDFN MAX4827ELT+T* 6 μDFN MAX4828ELT+T* 6 μDFN MAX4829ELT+T 6 μDFN MAX4830ELT+T 6 μDFN MAX4830ELT/V+T 6 μ ...
Page 2
Current-Limit Switches with NO-LOAD Flag in µDFN ABSOLUTE MAXIMUM RATINGS IN, ON, FFLG, NOLD, OUT to GND .........................-0.3V to +6V OUT Short Circuit to GND .................................Internally Limited Continuous Power Dissipation (T = +70°C) A 6-Pin µDFN (derate 2.1mW/°C above ...
Page 3
Current-Limit Switches with ELECTRICAL CHARACTERISTICS (continued +2.3V to +5.5V -40°C to +85°C, unless otherwise noted. Typical values are PARAMETER SYMBOL FFLG, NOLD Output-High Leakage Current Thermal Shutdown Thermal-Shutdown Hysterisis DYNAMIC Turn-On ...
Page 4
Current-Limit Switches with NO-LOAD Flag in µDFN (V = +3.3V +25°C, unless otherwise noted SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE 3.3V IN 0.001 0.0001 -40 -15 ...
Page 5
Current-Limit Switches with (V = +3.3V +25°C, unless otherwise noted CURRENT-LIMIT RESPONSE GND OUT 40μs/div CURRENT-LIMIT RESPONSE (OUT SHORTED TO GND) 40μs/div SWITCH TURN-OFF-TIME RESPONSE 100ns/div _______________________________________________________________________________________ NO-LOAD Flag ...
Page 6
Current-Limit Switches with NO-LOAD Flag in µDFN PIN NAME 1 IN Input. Bypass IN with a 0.1µF ceramic capacitor to ground. 2 GND Ground 3 OUT Switch Output. Bypass OUT with a 0.1µF capacitor to ground Current-Limit Fault Output. ...
Page 7
Current-Limit Switches with V IN NO-LOAD V ON THRESHOLD LOAD CURRENT 60μs NOLD STATUS Figure 1. MAX4826–MAX4831 No-Load Flag Response The MAX4826–MAX4831 feature a current-limit fault output, FFLG. Whenever a current-limit fault is activat- ed, FFLG goes low and ...
Page 8
Current-Limit Switches with NO-LOAD Flag in µDFN before t has elapsed. A retry time delay, t BLANK is started immediately after t BLANK during that time the switch is latched off. At the end the switch ...
Page 9
Current-Limit Switches with Pin Configuration TOP VIEW OF BOTTOM LEADS ON NOLD FFLG MAX4826– MAX4831 GND OUT μDFN CURRENT < 5mA DETECTOR (MAX4830/MAX4831) CURRENT < 10mA DETECTOR (MAX4826–MAX4829) NOLD N GND IN ...
Page 10
Current-Limit Switches with NO-LOAD Flag in µDFN Chip Information PROCESS: BiCMOS 10 ______________________________________________________________________________________ Package Information For the latest package outline information and land patterns www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the package code indicates ...
Page 11
... Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11 © 2009 Maxim Integrated Products NO-LOAD Flag in µ ...