M24C32-WMN6TP STMicroelectronics, M24C32-WMN6TP Datasheet - Page 17

• Manufacturer Part Number: M24C32-WMN6TP
• Description: IC EEPROM 32KBIT 400KHZ 8SOIC
• Manufacturer: STMicroelectronics

Specifications of M24C32-WMN6TP

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 32K (4K x 8)
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (3.9mm Width)
• Density: 32Kb
• Interface Type: Serial (I2C)
• Organization: 4Kx8
• Access Time (max): 900ns
• Frequency (max): 400KHz
• Write Protection: Yes
• Data Retention: 40Year
• Operating Supply Voltage (typ): 3.3/5V
• Package Type: SOIC
• Operating Temp Range: -40C to 85C
• Supply Current: 5mA
• Operating Supply Voltage (min): 2.5V
• Operating Supply Voltage (max): 5.5V
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 8
• Maximum Clock Frequency: 0.4 MHz
• Access Time: 900 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Maximum Operating Current: 2 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.3 V, 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-5027-2

M24C32-DF, M24C32-W, M24C32-R, M24C32-F
4.9
Figure 9.
Write Identification Page (M24C32-D only)
The Identification Page (32 bytes) is an additional page which can be written and (later)
permanently locked in Read-only mode. The Identification Page is written by issuing an
Write Identification Page instruction. This instruction uses the same protocol and format as
Page Write (into memory array), except for the following differences:
●
●
LSB address bits A4/A0 define the byte address inside the Identification Page.
If the Identification Page is locked, the data bytes transferred during the Write Identification
Page instruction are not acknowledged (NoAck).
WC
Byte Write
WC
Page Write
WC (cont'd)
Page Write
(cont'd)
Device type identifier = 1011b
MSB address bits A15/A5 are don't care except for address bit A10 which must be ‘0’.
Write mode sequences with WC = 0 (data write enabled)
Dev Select
Dev Select
ACK
Doc ID 4578 Rev 18
Data in N
R/W
R/W
ACK
ACK
Byte address
Byte address
ACK
ACK
ACK
Byte address
Byte address
ACK
ACK
Data in 1
Data in
Device operation
ACK
ACK
AI01106d
Data in 2
17/42