DS1245WP-150+ Maxim Integrated Products, DS1245WP-150+ Datasheet
DS1245WP-150+
Specifications of DS1245WP-150+
Related parts for DS1245WP-150+
DS1245WP-150+ Summary of contents
Page 1
... Data is automatically protected during power loss Replaces 128k x 8 volatile static RAM, EEPROM or Flash memory Unlimited write cycles Low-power CMOS Read and write access times of 100ns Lithium energy source is electrically ...
Page 2
... PACKAGES The DS1245W is available in two packages: 32-pin DIP and 34-pin PowerCap Module (PCM). The 32- pin DIP integrates a lithium battery, an SRAM memory and a nonvolatile control function into a single package with a JEDEC-standard 600-mil DIP pinout. The 34-pin PowerCap Module integrates SRAM for an out-of-tolerance condition. When such a condition ...
Page 3
... DS9034PC PowerCap. The PowerCap Module package design allows a DS1245W PCM device to be surface mounted without subjecting its lithium backup battery to destructive high- temperature reflow soldering. After a DS1245W module base is reflow soldered, a DS9034PC PowerCap is snapped on top of the base to form a complete Nonvolatile SRAM module ...
Page 4
ABSOLUTE MAXIMUM RATINGS Voltage on Any Pin Relative to Ground Operating Temperature Range Commercial: Industrial: Storage Temperature Range EDIP PowerCap Lead Temperature (soldering, 10s) Soldering Temperature (reflow, PowerCap) Note: EDIP is wave or hand soldered only. This is a stress ...
Page 5
AC ELECTRICAL CHARACTERISTICS PARAMETER Read Cycle Time Access Time to Output Valid OE to Output Valid Output Active OE CE Output High Z from Deselection Output Hold from Address Change Write Cycle Time Write Pulse Width Address ...
Page 6
WRITE CYCLE 1 SEE NOTES AND DS1245W ...
Page 7
WRITE CYCLE 2 SEE NOTES AND 12 \ POWER-DOWN/POWER-UP CONDITION DS1245W ...
Page 8
POWER-DOWN/POWER-UP TIMING PARAMETER V Fail Detect to and slew from slew from Valid to and Inactive Valid to End of ...
Page 9
... DS1245W-100+ 0°C to +70°C DS1245WP-100+ 0°C to +70°C DS1245W-100IND+ -40°C to +85°C DS1245WP-100IND+ -40°C to +85°C +Denotes a lead(Pb)-free/RoHS-compliant package. *DS9034PC+ or DS9034PCI+ (PowerCap) required. Must be ordered separately. PACKAGE INFORMATION For the latest package outline information and land patterns www.maxim-ic.com/packages. “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status ...
Page 10
REVISION HISTORY REVISION DATE Added the Package Information table; removed the DIP module 121907 package drawing and dimension table Updated the storage information, soldering temperature, and lead temperature information in the Absolute Maximum Ratings section; removed the -150 MIN/MAX information ...