AT24HC02B-PU Atmel, AT24HC02B-PU Datasheet - Page 6

• Manufacturer Part Number: AT24HC02B-PU
• Description: IC EEPROM 2KBIT 1MHZ 8DIP
• Manufacturer: Atmel

Specifications of AT24HC02B-PU

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 2K (256 x 8)
• Speed: 400kHz, 1MHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Organization: 256 x 8
• Interface Type: 2-Wire
• Maximum Clock Frequency: 1 MHz
• Access Time: 900 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Maximum Operating Current: 3 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 2.5 V, 3.3 V, 5 V
• Memory Configuration: 256 X 8
• Clock Frequency: 1MHz
• Supply Voltage Range: 1.8V To 5.5V
• Memory Case Style: DIP
• No. Of Pins: 8
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: AT24HC02B-10PU-1.8; AT24HC02B-10PU-1.8

Device Operation
CLOCK and DATA TRANSITIONS: The SDA pin is normally pulled high with an exter-
nal device. Data on the SDA pin may change only during SCL low time periods (see
Figure 2). Data changes during SCL high periods will indicate a start or stop condition as
defined below.
Figure 2. Data Validity
START CONDITION: A high-to-low transition of SDA with SCL high is a start condition
that must precede any other command (see Figure 3).
Figure 3. Start and Stop Definition
STOP CONDITION: A low-to-high transition of SDA with SCL high is a stop condition.
After a read sequence, the stop command will place the EEPROM in a standby power
mode (see Figure 3).
ACKNOWLEDGE: All addresses and data words are serially transmitted to and from
.
the EEPROM in 8-bit words.
The EEPROM sends a “0” to acknowledge that it has
received each word. This happens during the ninth clock cycle.
STANDBY MODE: The AT24HC02B features a low-power standby mode that is
enabled: (a) upon power-up and (b) after the receipt of the Stop bit and the completion
of any internal operations.
AT24HC02B [Preliminary]
6
5134D–SEEPR–4/07