AT24HC02B-PU Atmel, AT24HC02B-PU Datasheet - Page 8

• Manufacturer Part Number: AT24HC02B-PU
• Description: IC EEPROM 2KBIT 1MHZ 8DIP
• Manufacturer: Atmel

Specifications of AT24HC02B-PU

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 2K (256 x 8)
• Speed: 400kHz, 1MHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Organization: 256 x 8
• Interface Type: 2-Wire
• Maximum Clock Frequency: 1 MHz
• Access Time: 900 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Maximum Operating Current: 3 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 2.5 V, 3.3 V, 5 V
• Memory Configuration: 256 X 8
• Clock Frequency: 1MHz
• Supply Voltage Range: 1.8V To 5.5V
• Memory Case Style: DIP
• No. Of Pins: 8
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: AT24HC02B-10PU-1.8; AT24HC02B-10PU-1.8

Figure 5-6.
6. Device Addressing
8
AT24HC02B
Output Acknowledge
DATA OUT
DATA IN
The 2K EEPROM device requires an 8-bit device address word following a start condition to
enable the chip for a read or write operation, as shown in
Figure 6-1.
The device address word consists of a mandatory “1”, “0” sequence for the first four most signif-
icant bits as shown. This is common to all the EEPROM devices.
The next three bits are the A2, A1 and A0 device address bits for the 2K EEPROM. These three
bits must compare to their corresponding hardwired input pins.
The eighth bit of the device address is the read/write operation select bit. A read operation is ini-
tiated if this bit is high, and a write operation is initiated if this bit is low.
Upon a compare of the device address, the EEPROM will output a “0”. If a compare is not made,
the chip will return to a standby state.
SCL
START
Device Address
1
2K
MSB
1
0
1
0
8
A
ACKNOWLEDGE
2
A
1
Figure
A
0
9
R/W
LSB
6-1.
5134E–SEEPR–3/08