24LC04BT-E/MNY Microchip Technology, 24LC04BT-E/MNY Datasheet - Page 6

• Manufacturer Part Number: 24LC04BT-E/MNY
• Description: IC EEPROM 4KBIT 400KHZ 8TDFN
• Manufacturer: Microchip Technology

Specifications of 24LC04BT-E/MNY

• Memory Size: 4K (2 x 256 x 8)
• Package / Case: 8-TDFN
• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Organization: 2 Block x 256 x 8
• Interface Type: I2C
• Maximum Clock Frequency: 0.4 MHz
• Access Time: 900 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Maximum Operating Current: 3 mA
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.3 V, 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

24AA02/24LC02B
3.6
A control byte is the first byte received following the
Start condition from the master device. The control byte
consists of a four-bit control code. For the 24XX02, this
is set as ‘
The next three bits of the control byte are “don’t cares”
for the 24XX02.
The last bit of the control byte defines the operation to
be performed. When set to ‘
selected. When set to ‘
Following the Start condition, the 24XX02 monitors the
SDA bus, checking the device type identifier being
transmitted and, upon a
outputs an Acknowledge signal on the SDA line.
Depending on the state of the R/W bit, the 24XX02 will
select a read or write operation.
DS21709H-page 6
Operation
Read
Write
Device Addressing
1010’
Control
binary for read and write operations.
1010
1010
Code
0
’, a write operation is selected.
‘1010’
Block Address
Block Address
Block Select
1
’, a read operation is
code, the slave device
R/W
1
0
FIGURE 3-2:
Start Bit
x = “don’t care”
S
1
Control Code
0
Slave Address
1
CONTROL BYTE
ALLOCATION
© 2008 Microchip Technology Inc.
0
x
Select
Block
Bits
x
Acknowledge Bit
Read/Write Bit
x
R/W ACK