ZXLD1371EST16TC Diodes Inc. / Zetex, ZXLD1371EST16TC Datasheet - Page 39

• Manufacturer Part Number: ZXLD1371EST16TC
• Description: MOSFET LED Controller TSSOP TSSOP-16EP T&R 2.5K
• Manufacturer: Diodes Inc. / Zetex

Specifications of ZXLD1371EST16TC

• Rohs: yes

ZXLD1371
Document number: DS35436 Rev. 1 - 2
Applications Information
Over-Voltage Protection
The ZXLD1371 is inherently protected against open-circuit load when used in Buck configuration. However care has to be
taken with open-circuit load conditions in Buck-Boost or Boost configurations. This is because in these configurations there
is no internal open-circuit protection mechanism for the external MOSFET. In this case an Over-Voltage-Protection (OVP)
network should be provided externally to the MOSFET to avoid damage due to open circuit conditions. This is shown in
figure 19 below, highlighted in the dotted blue box.
The zener voltage is determined according to: Vz = V
If the LEDA voltage exceeds V
off Q1 until the voltage on the drain of Q1 falls below Vz. If the voltage at LEDA remains above V
then the ZXLD1371 will enter into a shutdown state.
Care should be taken such that the maximum gate voltage of the Q2 MOSFET is not exceeded.
Take care of the max voltage drop on the Q2 MOSFET gate. Typical devices for Z1 and Q2 are BZX84C and 2N7002
Z
the gate of MOSFET Q2 will rise turning Q2 on. This will pull the PWM pin low and switch
(cont.)
Figure 19. OVP Circuit
LEDMAX
www.diodes.com
39 of 42
+10% where V
LEDMAX
Diodes Incorporated
is maximum LED chain voltage.
A Product Line of
Z
for longer than 20ms
© Diodes Incorporated
February 2012
ZXLD1371