MAX5217EVKIT# Maxim Integrated, MAX5217EVKIT# Datasheet - Page 3

• Manufacturer Part Number: MAX5217EVKIT#
• Description: Data Conversion IC Development Tools MAX5217 Eval Kit
• Manufacturer: Maxim Integrated
• Type: DACr

Specifications of MAX5217EVKIT#

• Rohs: yes
• Product: Evaluation Kits
• Tool Is For Evaluation Of: MAX5217
• Interface Type: I2C
• Operating Supply Voltage: 2.7 V to 5.5 V
• Description/function: Demonstrates the MAX5217
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Current: 0.08 mA
• For Use With: MAX5217

Figure 1. No USB Connection Message
MAX5217 Evaluation Kit
Table 1. Jumper Settings (JU1–JU7)
*Default position.
www.maximintegrated.com
JUMPER
JU1
JU2
JU3
JU4
JU5
JU6
JU7
Not installed*
Not installed
Not installed
Not installed
Not installed
Not installed
Not installed
POSITION
Installed*
Installed*
Installed*
Installed
SHUNT
1-2*
1-2*
1-2*
2-3
1-3
2-3
Connects SDA pin of the U1 IC to the on-board microcontroller.
Disconnects SDA pin of the U1 IC to the on-board microcontroller.
Connects SCL pin of the U1 IC to the on-board microcontroller.
Disconnects SCL pin of the U1 IC to the on-board microcontroller.
Connects ADDR pin of IC U1 to VDD to determine I
Connects ADDR pin of IC U1 to DGND to determine I
ADDR pin of IC U1 is not connected to determine I
Connects the AUX signal of the on-board microcontroller to the AUX pin of IC U1.
Disconnects the AUX signal of the on-board microcontroller to the AUX pin of IC U1.
Connects load capacitor C25 and resistor R10 to the DAC output of IC U1.
Disconnects load capacitor C25 and resistor R10 to the DAC output of IC U1.
Connects the VDD pins of IC U1 to the on-board +3.3V supply.
Connects the VDD pins of IC U1 to a user-supplied power supply between +2.5V to +5.5V.
User-supplied VDD. The user must apply a voltage at the VDD test point.
Connects the REF pin of IC U1 to the on-board 2.5V reference (MAX6133).
Connects the REF pin of IC U1 to VDD.
User-supplied REF. The user must apply a voltage reference at the REF test point.
Evaluates: MAX5215/MAX5217/MAX5217B
6) Start the EV kit software by opening its icon in the
7) Within the DAC group box, select the Code and Load
8) Verify that the DVM measured is 2.5V.
Start | Programs menu. The EV kit software main
window appears, as shown in Figure 2.
selection from the Command drop-down list and drag
the scrollbar to the right until the data reaches 0xFFFF.
DESCRIPTION
2
2
C address. See Table 2.
C address. See Table 2.
2
C address. See Table 2.
Maxim Integrated │ 3