AT25DF081-SSHN-B Atmel, AT25DF081-SSHN-B Datasheet - Page 19

• Manufacturer Part Number: AT25DF081-SSHN-B
• Description: IC FLASH 8MBIT 66MHZ 8SOIC
• Manufacturer: Atmel

Specifications of AT25DF081-SSHN-B

• Format - Memory: FLASH
• Memory Type: DataFLASH
• Memory Size: 8M (4096 pages x 256 bytes)
• Speed: 66MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 1.65 V ~ 1.95 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (3.9mm Width)
• Cell Type: NOR
• Density: 8Mb
• Access Time (max): 7ns
• Interface Type: Serial (SPI)
• Boot Type: Not Required
• Address Bus: 1b
• Operating Supply Voltage (typ): 1.8V
• Operating Temp Range: -40C to 85C
• Package Type: SOIC
• Sync/async: Synchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 1.65V
• Operating Supply Voltage (max): 1.95V
• Supply Current: 12mA
• Mounting: Surface Mount
• Pin Count: 8
• Architecture: Sectored
• Supply Voltage (max): 1.95 V
• Supply Voltage (min): 1.65 V
• Maximum Operating Current: 12 mA
• Mounting Style: SMD/SMT
• Organization: 64 KB x 16
• Memory Configuration: 4096 Pages X 256 Bytes
• Clock Frequency: 66MHz
• Supply Voltage Range: 1.65V To 1.95V
• Memory Case Style: SOIC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3674E–DFLASH–8/08
The tables below detail the various protection and locking states of the device.
Table 9-4.
Note:
Table 9-5.
WP
0
0
1
1
(Don't Care)
WP
1. “n” represents a sector number
X
SPRL
0
1
0
1
Software Protection Register States
Hardware and Software Locking
Hardware
Locking
Software
Locked
Locked
Sector Protection Register
SPRL Change Allowed
Can be modified from 0 to 1
Locked
Can be modified from 0 to 1
Can be modified from 1 to 0
n
0
1
(1)
Sector Protection Registers
Unlocked and modifiable using the
Protect and Unprotect Sector
commands. Global Protect and
Unprotect can also be performed.
Locked in current state. Protect and
Unprotect Sector commands will be
ignored. Global Protect and
Unprotect cannot be performed.
Unlocked and modifiable using the
Protect and Unprotect Sector
commands. Global Protect and
Unprotect can also be performed.
Locked in current state. Protect and
Unprotect Sector commands will be
ignored. Global Protect and
Unprotect cannot be performed.
Unprotected
Protected
Sector
AT25DF081
n
(1)
19