SC-TILT SolderCore, SC-TILT Datasheet - Page 5

• Manufacturer Part Number: SC-TILT
• Description: Daughter Cards & OEM Boards CoreTilt SExI Mod Accelerometer
• Manufacturer: SolderCore

Specifications of SC-TILT

• Rohs: yes
• Product: Daughter Boards
• Interface Type: I2C, SPI
• Operating Supply Voltage: 3.3 V

Jumper Configuration
CoreTilt is shipped configured to use the I2C interface. Figure 1 shows the default
settings for all the jumper settings
Figure 1. CoreTilt module. (I2C Config)
Note that SJ3, SJ5, and SJ5 are intentionally left open circuit in the shipping
configuration.
The I2C pull up resistors, R1 and R2, are not populated by default. If CoreTilt is used
without SenseCore, R1/R2 should be fitted, or pull up resistors must be fitted
elsewhere in the design.
To configure CoreTilt for SPI mode, the solder jumpers should be configured as shown
in Figure 2 :
Figure 2. CoreTilt module. (SPI Config)
5