AS1107-DB ams, AS1107-DB Datasheet - Page 2

• Manufacturer Part Number: AS1107-DB
• Description: Display Development Tools AS1107 Demo Board
• Manufacturer: ams

Figure 1: Board Description
AS1100/06/07
Demoboard Application Note
General Description
Power Supply Description
Table 1: Power Supply Description
Mark Info
Button Description
Table 2: Button Description
Mark Info
External Interface Description
Table 3: External Interface Description
Mark Pin
www.austriamicrosystems.com
C
D
G
H
A
B
E
F
BAT / EXT
- / +
MENU
µC / -
EXT / +
EXT
External interface pins
DOUT
LOAD
CLK
DIN
GND
Description
Place a 1.5V AA cell here.
Power Supply Connectors for VCC and GND. 1.5 to 3.5V DC.
Description
Hitting this button during microcontroller (µC) operation will show up the menu. If the menu is already shown this
button will cycle through the menu options. If the demoboard is controlled externally this button has no function.
Menu mode: This button will cycle reverse through the possible values of a menu option.
Normal mode: A button press will activate the onboard uC.
Menu mode: This button will cycle forward through the possible values of a menu option.
Normal mode: A button press will activate the interface “H” to control the demoboard externally.
Description
This LED is on if the demoboard is controlled externally.
This pin will clock out data from the LED driver on the demoboard.
On this pin the load pulse can be applied.
Clock from external source.
Data input from external source.
Ground pin for the data cable.
The demoboard is powered via
the AA cell.
Revision 1.00
switched off.
The demoboard is
The demoboard is powered via
the external connectors “C”
austriamicrosystems
2 - 4