A13-OLINUXINO-MICRO Olimex Ltd., A13-OLINUXINO-MICRO Datasheet - Page 24

• Manufacturer Part Number: A13-OLINUXINO-MICRO
• Description: Development Boards & Kits - ARM OLINUXINO MICRO SBC ALLWINNER A13 CTX A8
• Manufacturer: Olimex Ltd.

Specifications of A13-OLINUXINO-MICRO

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: ALLWINNER A13
• Core: ARM Cortex A8
• Interface Type: 4-Wire, Audio, SD card, UART, UEXT, USB, USB OTG, VGA
• Operating Supply Voltage: 5 V
• Description/function: Open source single board mini computer
• Dimensions: 100 mm x 85 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 25 C
• Tradename: A13 Olinuxino
• For Use With: A13-OLINUXINO-MICRO-SD

OLIMEX© 2012
A13-OLinuXino-MICRO User's Manual
6.10.2 HOST_EN
This jumper allows to control the power line on the USB_HOST. If it is open it is disconnected
from the USB_HOST connector and the devices are always powered. If it is closed it is connected
to the processor and can be controlled when to power via software means.
Default positions is open.
6.11 Additional hardware components
The components below are mounted on OLinuXino but are not discussed above. They are listed
here for completeness:
UBOOT button – used to enter bootloader mode
Reset button – used to reset the board
256GB (128Mbit x 16) DDR3 SDRAM – the exact memory used in the first revisions of the board
is HYNIX H5TQ2G63BFR
LED1 + PWR_LED – GPIO LED + power-on LED
Page 24 of 30