MIKROE-11 mikroElektronika, MIKROE-11 Datasheet - Page 29

• Manufacturer Part Number: MIKROE-11
• Description: Development Boards & Kits - AVR BIGAVR2 DEVELOPMENT SYSTEM
• Manufacturer: mikroElektronika

Specifications of MIKROE-11

• Rohs: yes
• Product: Development Kits
• Tool Is For Evaluation Of: ATMEGA128
• Core: AVR8
• Interface Type: IDC10, JTAG, RS-232, USB
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 bit
• For Use With: ATmega, AT90

DIRECT PORT ACCESS
29
All the microcontroller input/output pins can be accessed via 10-pin connectors (2x5) placed
along the right side of the board. For each microcontroller port there is one connector provid-
ing eight port pins for data transfer and two additional pins connected to VCC and GND.
Figure 36
Direct port access connectors
These connectors can be used to connect the system to external devices such as Serial
Ethernet, Compact Flash, DAC, CAN, RTC, RS-485 etc. In case on-board and external
peripherals use the same pins, then on-board peripherals must be disconnected from the
microcontroller by setting the appropriate jumpers. The connectors can be also used for
attaching logic probes or other test equipment.
Figure 37
Connecting external peripheral via flat cable