EA-QSB-015 Embedded Artists, EA-QSB-015 Datasheet - Page 6

• Manufacturer Part Number: EA-QSB-015
• Description: Development Boards & Kits - ARM QUICK START BOARD LPC11U35
• Manufacturer: Embedded Artists

Specifications of EA-QSB-015

• Rohs: yes
• Product: Development Kits
• Tool Is For Evaluation Of: LPC11U35
• Core: ARM Cortex M0
• Interface Type: USB
• Operating Supply Voltage: 3.3 V

Copyright 2012 © Embedded Artists AB
LPC11U35 QuickStart Board - User’s Guide
Note that Embedded Artists does not replace boards that have been damaged by ESD.
2.3
Handle the LPC11U35 QuickStart Board with care. The board is not mounted in a protective case/box
and is not designed for rough physical handling. The USB connector can ware out after excessive use.
The board is mainly designed for evaluation and prototyping use.
2.4
The LPC11U35 has a Code Read Protection function (specifically CRP3, see LPC11U35
datasheet/user’s manual for details) that, if enabled, will make the LPC11U35 impossible to reprogram
(unless the user program has implemented such functionality).
Note that Embedded Artists does not replace boards where the LPC11U35 has CRP3 enabled.
It’s the user’s responsibility to not invoke this mode by accident.
2.5
The LPC11U35 QuickStart Board is CE marked. See separate CE Declaration of Conformity
document.
The LPC11U35 QuickStart Board is a class B product.
EMC emission test has been performed on the LPC11U35 QuickStart Board. The USB interface has
been in use and also powered the device during the test. General expansion connectors where internal
signals are made available have been left unconnected. Connecting other devices to the product via
the general expansion connectors may alter EMC emission. It is the user’s responsibility to make sure
EMC emission limits are not exceeded when connecting other devices to the general expansion
connectors of the LPC11U35 QuickStart Board.
Due to the nature of the LPC11U35 QuickStart Board – a prototype and evaluation board – fast
transient immunity tests and conducted radio-frequency immunity tests have not been executed.
Externally connected cables are assumed to be less than 3 meters. The general expansion connectors
where internal signals are made available do not have any other ESD protection than from the chip
themselves. Observe ESD precaution.
Note that the LPC11U35 QuickStart Board can also be considered to be a component if integrated into
another product. The CE mark on the LPC11U35 QuickStart Board cannot be extended to include the
new (user created) product. It is the user’s responsibility to make sure EMC emission limits are not
exceeded and CE mark the final product.
2.6
Embedded Artists have a broad range of LPC1000/2000/3000/4000 based boards that are very low
cost and developed for prototyping / development as well as for OEM applications. Modifications for
OEM applications can be done easily, even for modest production volumes. Contact Embedded Artists
for further information about design and production services.
2.6.1
Embedded Artists provide design services for custom designs, either completely new or modification to
existing boards. Specific peripherals and I/O can be added easily to different designs, for example,
communication interfaces, specific analog or digital I/O, and power supplies. Embedded Artists has a
broad, and long, experience in designing industrial electronics in general and with NXP’s
LPC1000/2000/3000/4000 microcontroller families in specific. Our competence also includes wireless
and wired communication for embedded systems. For example IEEE802.11b/g (WLAN), Bluetooth™,
ZigBee™, ISM RF, Ethernet, CAN, RS485, and Fieldbuses.
General Handling Care
Code Read Protection
CE Assessment
Other Products from Embedded Artists
Design and Production Services
Page 6