TWR-PXD20-KIT Freescale Semiconductor, TWR-PXD20-KIT Datasheet - Page 4

no-image

TWR-PXD20-KIT

Manufacturer Part Number
TWR-PXD20-KIT
Description
Development Boards & Kits - Other Processors PXD20 Tower MCU Kit
Manufacturer
Freescale Semiconductor
Datasheet

Specifications of TWR-PXD20-KIT

Rohs
yes
Product
Development Platforms
Tool Is For Evaluation Of
MPXN2020VMG116
Core
e200z0, e200z6
Interface Type
CAN, RS-22, RS-485, SPI, UART
Data Bus Width
32 bit
For Use With
MPXN2020VMG116
4
In this quick start guide, you will learn how to set up the TWR-PXN20 module and run
the included demonstration software. For more detailed information, please see the
user manual found on the included DVD or at freescale.com/TWR-PXN20.
Insert the TWR-PXN20 and TWR-SER
modules into the primary and secondary
elevator module (as shown). The
“primary” and “secondary” cards edges
for each module are indicated along the
card edges.
Connect the TWR-PXN20 module to a
computer or a wall charger using the
provided USB cable. Additionally, the
USB connector on the primary elevator
or OSJTAG connector can be used to
power up the module.
Step-by-Step Installation Instructions
2
1
Powering Up the
TWR-PXN20
Connecting the
TWR-SER
Quick Start Guide
The MC9S08JM60 serial to USB bridge
solution provides an RS-232 equivalent
connection to the host computer through
the USB communications device class.
When plugged in and powered, the USB
connection will enumerate as a COM port
on the PC. This means any terminal utility
program may be used to receive serial
data from the USB port. To determine the
COM port number for the connection, right
click on the My Computer icon and select
“Manage,” click Device Manager, find and
expand ports (COM and LPT).
When the cable is plugged in for the first
time, the Found New Hardware Wizard
will start. Select the option Install from a
list or specific location (Advanced), then
3
4
Using the Serial
Installing the
Software Driver
to USB Bridge

Related parts for TWR-PXD20-KIT