MIKROE-1207 mikroElektronika, MIKROE-1207 Datasheet - Page 2

• Manufacturer Part Number: MIKROE-1207
• Description: Development Boards & Kits - PIC / DSPIC EasyPIC FUSIONv7 MCU dsPIC33EP512MU810
• Manufacturer: mikroElektronika

Specifications of MIKROE-1207

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: dsPIC33EP512MU810
• Interface Type: CAN, I2C, SPI, UART, USB
• For Use With: dsPIC33EP512MU810

Card information
The PT MCU CARD 1 is shown on Figure 1. It contains dsPIC33EP512MU810 microcontroller with on-chip peripherals and is a great choice for both beginners and
professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
page 2
Figure 1: MCU card with dsPIC33EP512MU810
3
1
2
1
2
3
dsPIC33EP512MU810
memory (flash),
purpose
and 32kHz oscillators, internal Real time clock (RTC), 2
controllers. It also contains 3
and programming and debugging interface.
8MHz crystal oscillator.
value that provides clock frequency which can be used directly, or with the PLL
multipliers to create higher MCU clock value. MCU card also contains 32.768 kHz
crystal oscillator which provides external clock waveform for RTCC module.
USB communications lines.
D+ and D- lines of the on-board USB connector with RG2 and RG3 microcontroller
pins. Since
I/O
dsPIC33EP512MU810
pins, 9
52K bytes
16-bit
has
timers, 2
analog comparators,
We carefully chose the most convenient crystal
of data memory. It has
These two jumpers, when in USB position, connect
70 MIPS
supports USB, jumpers are in USB position.
ADC
CPU speed,
(32 ch), 4 UARTs, internal 7.37 MHz
12 motor control PWM, 2
USB
512K bytes
I2C,
2.0 OTG, 83 General
4
SPI
of program
and 2
CAN
QEI
v7